Calculating momentum when you know mass and KE

  • Thread starter Thread starter connie5828
  • Start date Start date
  • Tags Tags
    Mass Momentum
AI Thread Summary
To calculate the momentum of an 8 kg object with a kinetic energy of 70 J, one must first use the correct kinetic energy formula, KE = mv²/2. By rearranging this equation to solve for velocity (v), it becomes clear that v can be derived from v² = (2 * KE) / m. After calculating the velocity, momentum can be found using the formula P = mv. The discussion emphasizes the importance of understanding and correctly applying physics equations rather than just plugging in numbers. Ultimately, the correct calculations lead to the momentum value of 33 kg·m/s.
connie5828
Messages
11
Reaction score
0

Homework Statement



Calculate the momentum of an object of mass 8 kg if its kinetic energy is 70 J

Homework Equations



I am not sure what the equation is. Every one I have tried hasn't worked

The Attempt at a Solution


KE=MV squared?
 
Physics news on Phys.org
Kinetic energy is not equal to mv2.

Write down the definitions of kinetic energy and momentum. (You do know them, right?) Then combine them by solving for the variable you don't know.
 
Hello connie5828,

Welcome to Physics Forums!
connie5828 said:

Homework Statement



Calculate the momentum of an object of mass 8 kg if its kinetic energy is 70 J

Homework Equations



I am not sure what the equation is. Every one I have tried hasn't worked
Well, you know the object's kinetic energy and mass, so what does that say about the object's velocity? If you happen to figure out the object's velocity, and since you know its mass, then its momentum is ...?

You'll frequently find that physics is usually not about simply plugging in numbers into an existing equation (although that does happen sometimes). Much of the time you'll find that multiple laws/equations are necessary to be combined to figure out a specific problem. Which is why it's a good idea to reflect upon the equations to figure out what those equations really mean, and how they apply to various problems.

The Attempt at a Solution


KE=MV squared?
Close, but not quite right. You'll need the correct equation for kinetic energy (it's almost what you wrote above, but not quite), and another equation which describes momentum.

[Edit: I see diazona beat me to the answer.]
 
looks like my first reply may not have posted. thanks for your help. Please correct what I am not understanding

KE=MV2/2
so equation would be 70=82/2
70=64/2 (is this correct??)
70/32=2.188
P=MV
P=8*2.188

the problem is I am using the practice equation to try to figure this out and it says the answer is 33. My calculations are definitely off somewhere. Please help.
 
Hi Connie, you've got the definitions right now, but you squared the wrong thing. KE is mv2/2 = 8v2/2, but you wrote 82/2 = m2/2.

Start with the equation 70 = mv2/2. Substitute for the mass: 70 = 8v2/2. Then solve for v. That means keep doing the same thing (multiply or divide by the same numbers) to each side of the equation till you have it in the form v2 = some number. Then take the square root of each side, so you have v = the square root of that number.

Then go to your other equation, momentum = mv, and replace the v with what you found v was equal to.
 
Last edited:
totally got it. THANK YOU! Taking anatomy and Physics and anatomy I rock at Physic I learning with the help of people who have amazing science brains. Thanks!
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'
Figure 1 Overall Structure Diagram Figure 2: Top view of the piston when it is cylindrical A circular opening is created at a height of 5 meters above the water surface. Inside this opening is a sleeve-type piston with a cross-sectional area of 1 square meter. The piston is pulled to the right at a constant speed. The pulling force is(Figure 2): F = ρshg = 1000 × 1 × 5 × 10 = 50,000 N. Figure 3: Modifying the structure to incorporate a fixed internal piston When I modify the piston...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top