Calculating Volume Increase for Cube w/ Expanding Surface Area

  • Thread starter Thread starter Tom McCurdy
  • Start date Start date
  • Tags Tags
    Set
AI Thread Summary
A cube's surface area is increasing at a constant rate of 7 in²/sec, leading to a need to calculate the volume increase when the surface area reaches 204 in². The relationship between surface area and volume is established using the formulas for surface area (SA = 6x²) and volume (V = x³). By applying the chain rule, the rate of change of volume (dV/dt) can be expressed in terms of the rate of change of surface area (dS/dt) and the dimensions of the cube. The calculations yield a volume increase rate of approximately 10.2 in³/sec when the surface area is 204 in². The discussion concludes with an acknowledgment that the derived formula is specific to cubes and may not apply to other closed surfaces.
Tom McCurdy
Messages
1,017
Reaction score
1
If a cube is expanding so the surface area is increasing at a constant rate of 7 in^2/sec How fast is the volume increasing at the instant the surface area is 204 in^2 ?

How would I go about starting this problem to set it up?

surface area = 6x^2
volume = x^3
 
Physics news on Phys.org
Use the chain rule.

You're given:
\frac{d}{dt}S(x(t))=\frac{dS}{dx}\frac{dx}{dt}=7

You have to find:
\frac{dV}{dt}=\frac{dV}{dx}\frac{dx}{dt}
 
\frac{dS}{dx}\frac{dx}{dt} = 7


12 x \frac{dx}{dt}=7

\frac{dx}{dt}=\frac{7}{12x}

\frac{dV}{dt}=\frac{dV}{dx} \frac{dx}{dt}

\frac{dV}{dt}= 3x^2 \frac{7}{12x} = \frac {7x}{4}

SA = 204 = 6x^2

SA = \sqrt{34}

rate = \frac{7\sqrt{34}}{4}

rate= 10.2 in^3/sec
 
Last edited:
Does my work seem correct?
 
Tom McCurdy said:
\frac{dS}{dx}\frac{dx}{dt} = 7


12 x \frac{dx}{dt}=7

\frac{dx}{dt}=\frac{7}{12x}

\frac{dV}{dt}=\frac{dV}{dx} \frac{dx}{dt}

\frac{dV}{dt}= 3x^2 \frac{7}{12x} = \frac {7x}{4}

SA = 204 = 6x^2

SA = \sqrt{34}

you mean
x= \sqrt{34}

rate = \frac{7\sqrt{34}}{4}

rate= 10.2 in^3/sec

Yes.
 
Thank you for your help

So the general formula for something like this would simply be
SA rate= X
Volume rate wanted at Surface Area = Y

\frac{X \sqrt{\frac{Y}{6}}}{4} = Volume Rate
 
Hold on,this is a cube we're talking about.So if your formula works for the cube,i can guantee u it doesn't work for any other closed surface.

Daniel.
 
Yes I figured it was for the cube only, thanks for the clafication and the help though
 
Back
Top