Cannon Hits Cliff: Calculating Minimum Muzzle Velocity & Distance Past Edge

  • Thread starter Thread starter Yahaira.Reyes
  • Start date Start date
  • Tags Tags
    Cannon
AI Thread Summary
To determine the minimum muzzle velocity for a cannon to clear a 25.0 m cliff from 60 m away, the mass of the shell is irrelevant. The initial velocity can be broken down into x and y components using trigonometric functions based on the launch angle. Time can be expressed as a function of horizontal distance, allowing for substitution into the vertical motion equation. By setting the equations for the projectile's height and distance, the necessary velocity can be calculated. This approach effectively combines the horizontal and vertical motion to solve the problem.
Yahaira.Reyes
Messages
7
Reaction score
0
A connon, located 60 m from the base of a vertical 25.0m tall clift, shoots a 15 kg shell at 43.0 degrees above the horizontal toward the cliff.

A) what must the minimum muzzle velocity be for the shell to clear the top of the cliff?
B) The ground at the top of the cliff is level, with a constant elevation of 25.0 m above the cannon. Under the conditions of part (A), how far does the shell past the edge of the cliff?

x=x0 + V0t
Vy= v0y-gt
y=y0+v0yt-1/2gt^2
vf^2=vi^2-2ax

I am a little throw off by the kg of the shell. I do not know how to start the prob.
 
Physics news on Phys.org
As is always the case with "gravity" problems, the mass of the shell is irrelevant. Ignore it. Use precisely the equations you have with one addition: If V0 is the initial muzzle velocity, then the x-component is VO cos(43) and the y-component is VO sin(43).
 
wouldn't I need to calculate the time ? All of the equations require time.
 
Yahaira.Reyes said:
wouldn't I need to calculate the time ? All of the equations require time.

no, you can put time in function of x, and then substitute in equation of y, getting y in funtion of x.

that gives the y coordinate in respect with x. with x=60 and y=25,you know that there will be a velocity V0 needed.(this after you've done the cos/sin thing HallsofIvy told and well.)
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'A bead-mass oscillatory system problem'
I can't figure out how to find the velocity of the particle at 37 degrees. Basically the bead moves with velocity towards right let's call it v1. The particle moves with some velocity v2. In frame of the bead, the particle is performing circular motion. So v of particle wrt bead would be perpendicular to the string. But how would I find the velocity of particle in ground frame? I tried using vectors to figure it out and the angle is coming out to be extremely long. One equation is by work...
Back
Top