Capacitor Discharge: Deriving the Correct Expression for Potential Difference

AI Thread Summary
The discussion revolves around deriving the expression for potential difference across a discharging capacitor in a series circuit with a resistor. The initial attempt incorrectly suggested that the potential difference increases over time, leading to confusion about the correct expression. The correct formula for the potential difference is V_c(t) = V_initial e^(-t/RC), reflecting the capacitor's discharge behavior. The misunderstanding stemmed from the direction of current and voltage change, where the current should be defined as flowing into the capacitor, resulting in a negative rate of change of voltage. Clarification was provided that the defining equation for the capacitor inherently accounts for direction, resolving the confusion.
Ahmedbasil
Messages
8
Reaction score
0

Homework Statement


You have a capacitor, of capacitance C farads, with charge Q coulombs. It is connected in series with a resistor of resistance R ohms. Derive an expression for the potential difference over the capacitor at any time t.2. Homework Equations and theorems
I_{c} = C\frac{dV_{c}}{dt}
V = IR

*Kirchhoff's voltage law

The Attempt at a Solution


Using KVL:

V_{c} - I_{c} R = 0
V_{c} = RC\frac{dV_{c}}{dt}
\frac{1}{RC} dt = \frac{1}{V_{c}} dV_{c}

then:

V_{c} (t) = V_{initial} e^{\frac{t}{RC}}

where

V_{initial} = \frac{Q}{C}

3. My concern

as t approaches infinity the potential difference over the capacitor also approaches infinity. This is definitely not right - the capacitor is discharging. Every textbook/website I look at comes up with the equation:

V_{c} (t) = V_{initial} e^{\frac{-t}{RC}}

For the life of me I cannot figure out what I'm doing wrong. I know what's supposedly wrong with my solution, but I cannot see the mathematical proof of the minus sign on the power of e.

I'd greatly appreciate any help or insight anyone could give.
 
Physics news on Phys.org
It's a current direction issue. dV/dt will be negative for the capacitor, right? (It's discharging, so its voltage is dropping). But the current in your circuit you've defined to be positive flowing out of the capacitor. So you should start with Ic = -C dVc/dt.
 
I suppose that dVc/dt doesn't direction into account. Why doesn't it though? At first I considered this, but then I dismissed it, knowing that it's perfectly fine to have a rate of change w.r.t another variable negative. The equation should be:

I_{c} = C |\frac{dV_{c}}{dt}|

Anyway, thanks very much for your help.
 
Last edited:
Ahmedbasil said:
I suppose that dVc/dt doesn't direction into account. Why doesn't it though? At first I considered this, but then I dismissed it, knowing that it's perfectly fine to have a rate of change w.r.t another variable negative. The equation should be:

|I| = C |\frac{dV_{c}}{dt}|

Anyway, thanks very much for your help.

The defining equation for the capacitor does take direction into account. In the definition, the current direction is defined to be INTO the capacitor, and resulting voltage change is positive. Thus, when the voltage change is NEGATIVE, the current will come OUT of the capacitor.
 
Owh, okay, I assumed it is the current OUT of the capacitor. I see :). My bad, and thank you very much.
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Back
Top