Capacitor in NPN Transistor: Exploring Unknown Theory

AI Thread Summary
The discussion centers on the role of a capacitor placed between the base and collector of an NPN transistor. Participants speculate that this configuration may serve as a feedback mechanism or a high-frequency filter. There is a call for clarification, emphasizing the need for a complete schematic to better understand the capacitor's function. One user notes that in audio amplification circuits, such capacitors often act as coupling components, providing local negative feedback and functioning as high-pass filters. Overall, the conversation highlights the complexity and under-explored nature of this topic in transistor theory.
mearom
Messages
3
Reaction score
0
What's about this? Where a capacitor is between base and collector (NPN). I have formulated some of my own theories (it seems like this is totally unknown of on the internet, and the books I've looked at don't explain it), but I have thought of flaws to all my theories. Can anyone please explain? Thankyou
 
Engineering news on Phys.org
I think I thought of it

IS it just for feedback, acting as a really high freq filter?

Sometimes you just have to ask to know
 
Your post tells us basically nothing. You'd need to show us a complete schematic for us to be able to tell you why the capacitor is there.

- Warren
 
what is cc in vas?
 
In the voltage amplification stage of a three stage audio amp there is often a coupling capacitor connected to base and collector/ input and output. I think this is as a high pass filter so as to provide local negative feedback
 
Very basic question. Consider a 3-terminal device with terminals say A,B,C. Kirchhoff Current Law (KCL) and Kirchhoff Voltage Law (KVL) establish two relationships between the 3 currents entering the terminals and the 3 terminal's voltage pairs respectively. So we have 2 equations in 6 unknowns. To proceed further we need two more (independent) equations in order to solve the circuit the 3-terminal device is connected to (basically one treats such a device as an unbalanced two-port...
suppose you have two capacitors with a 0.1 Farad value and 12 VDC rating. label these as A and B. label the terminals of each as 1 and 2. you also have a voltmeter with a 40 volt linear range for DC. you also have a 9 volt DC power supply fed by mains. you charge each capacitor to 9 volts with terminal 1 being - (negative) and terminal 2 being + (positive). you connect the voltmeter to terminal A2 and to terminal B1. does it read any voltage? can - of one capacitor discharge + of the...
Thread 'Weird near-field phenomenon I get in my EM simulation'
I recently made a basic simulation of wire antennas and I am not sure if the near field in my simulation is modeled correctly. One of the things that worry me is the fact that sometimes I see in my simulation "movements" in the near field that seems to be faster than the speed of wave propagation I defined (the speed of light in the simulation). Specifically I see "nodes" of low amplitude in the E field that are quickly "emitted" from the antenna and then slow down as they approach the far...

Similar threads

Back
Top