Calculating Velocity of a Car Rolling Off a Cliff

  • Thread starter Thread starter loganblacke
  • Start date Start date
  • Tags Tags
    Car
AI Thread Summary
A car rolls down a 15.6-degree incline for 27.5 meters before falling off a 57-meter-high cliff. The acceleration due to gravity is calculated as -2.63 m/s², and the velocity of the car at the cliff's edge is determined to be 12.04 m/s. The initial vertical velocity when leaving the cliff is found to be 3.24 m/s. A quadratic equation is set up to solve for the time of fall, resulting in an incorrect time of 3.748 seconds. The discussion emphasizes the need for clarity on calculating the final velocity and its implications for solving the problem.
loganblacke
Messages
48
Reaction score
0

Homework Statement


A car is parked on an incline of 15.6 degrees below the horizontal, the brakes fail and it rolls down the incline 27.5m and off the edge of a cliff that is 57m above the ground. Find the car's position when it its the ground relative to the base of the cliff.


Homework Equations


rather than type them all out, I'll just say kinematics.


The Attempt at a Solution


I know you have to break the gravity vector up into components so I took -9.8 sin(15.6) = -2.63 m/s^2. I keep calculating the average speed of the car, not the speed at the point it goes off the cliff. Please help, thanks!
 
Physics news on Phys.org
v^2=u^2+2as, so the car is traveling at (2*9.8sin(15.6)*27.5)^0.5 when it goes off the cliff.
 
You have not said enough. You keep calculating the average speed. Do you want to calculate the average speed? Could you use the average speed? What is your plan for this question?
 
cosmo123 said:
v^2=u^2+2as, so the car is traveling at (2*9.8sin(15.6)*27.5)^0.5 when it goes off the cliff.

Thanks, but I'm still getting the wrong answer. I end up with the velocity of the car being 12.04 m/s when it leaves the cliff. So initial velocity in the y direction when the car leaves the cliff should be 12.04*sin(15.6) = 3.24. Plug that into y=Vi(t)-4.92(t)^2 to solve for t. End up with 57 = 3.24(t) - 4.92(t)^2.. rewritten in quadratic form.. 4.92t^2-3.24t-57=0. then t = 3.748 seconds which is not correct.
 
vertigo said:
You have not said enough. You keep calculating the average speed. Do you want to calculate the average speed? Could you use the average speed? What is your plan for this question?

How is that not enough information? You have a car rolling down a slope then off a cliff. You obviously need to know the velocity of the car as it rolls of the cliff to answer the question. I calculated the acceleration but couldn't remember how to get Vfinal.
 
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
Back
Top