Charged sphere hanging from a string-Find the charge?

AI Thread Summary
A charged sphere of mass 126 g hangs from a string at a 30-degree angle in an electric field of 151 N/C. The tension in the string must balance both the gravitational force and the electric force acting on the sphere. The correct approach involves using the tension components: Tcos30 balances the weight (mg), and Tsin30 balances the electric force (qE). The calculations lead to the conclusion that the charge on the sphere can be determined by setting the horizontal tension equal to the electric force. The final expression for the charge, derived from the correct tension analysis, is essential for solving the problem accurately.
Hayliee30
Messages
7
Reaction score
0
Charged sphere hanging from a string--Find the charge?

A small, plastic sphere of mass m = 126 g is attached to a string as shown in the figure. There is an electric field of 151 N/C directed along the + x axis. If the string makes an angle 30 degrees with the y-axis when the sphere is in equilibrium, what is the charge on the sphere?


http://s1345.photobucket.com/editor...4-01-19at25516PM_zps9741502d.png.html?filters[media%5Ftype]=image&sort=3&o=0

I figured you could use the equation F=QE ---------> you're given E, and I think you have the information to find F?


I did the following:

Tcos30 = mg

T= mg/cos30--------> (.126 kg x 9.8)/cos30-------> T= 1.4258

So I assume T is the only force to consider..therefore:


F=QE

1.4258 = 151Q


Q= .00944 C

For some reason this answer isn't correct. So what am I doing wrong? I thought about multiplying the force side of the equation(1.4258) by sin30..however I don't see why I would do that. Anyways, can anyone help me?? I've been stuck on this problem all day! I greatly appreciate any help given.
 
Physics news on Phys.org
The sphere is in the vicinity of the electric field directed horizontally. This creates an electric force of magnitude qE on the sphere. For the sphere to be in equilibrium at angle θ, this force must be balanced.
 
Right, I'm aware the force must be balanced. However, I believe I'm missing something. I have gravity and tension as forces; gravity acting straight down onto the sphere and Tcos30 in the +y direction. I'm assuming you incorporate the tension in the +x direction, as well, to put it into equilibrium, but I'm not sure how to do this. My guess would be Tsin30---> 1.4258(.5)= .7129. Then would I set up the equation 1.4258(.7129) = 151q? I'm still slightly confused.
 
Yes, Tsinθ is the horizontal component of tension that would balance the electric force qE. The gravitational force balances the vertical component Tcosθ, as you said. From the analysis of the statics in the vertical direction, you can obtain T. Use this for the analysis in the horizontal direction to then get q.

I think this is what you were trying to do but the final equation you wrote is not correct, which may have been more obvious to you if you had used variables up to the point where you obtain an explicit expression for q.
 
Oh okay, I understand now! Thank you so much for the help!
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Collision of a bullet on a rod-string system: query'
In this question, I have a question. I am NOT trying to solve it, but it is just a conceptual question. Consider the point on the rod, which connects the string and the rod. My question: just before and after the collision, is ANGULAR momentum CONSERVED about this point? Lets call the point which connects the string and rod as P. Why am I asking this? : it is clear from the scenario that the point of concern, which connects the string and the rod, moves in a circular path due to the string...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top