Coefficient of kinetic friction between box and floor

AI Thread Summary
A 98 N box of oranges is pushed across a clean steel surface, slowing down at a rate of 1.1 m/s². The horizontal push force is 25 N, while the vertical component is 20 N downward. The calculations for the coefficient of kinetic friction (uk) involve determining the net forces acting on the box, leading to an initial estimate of 14 N for friction. After correcting for the direction of acceleration, the friction force is recalculated to be 36 N, resulting in a final coefficient of kinetic friction of approximately 0.3. The discussion concludes with confirmation of the calculations and rounding of the final value.
Edwardo_Elric
Messages
101
Reaction score
0

Homework Statement


A 98 N box of oranges is being pushed across a horizontal clean steel surface until it stops. As it moves, it is slowing down at a constant rate of 1.1m/s each second. The push force has a horizontal component of 25N and a vertical component of 20N downward. Calculate the coefficient of kinetic friction between the box and the floor.


Homework Equations





The Attempt at a Solution


summation of Fx = 25N - fk = ma
= 25N - fk = (10kg)(1.1m/s^2)
fk = 14N?
summation of Fy= 0 = -Fw - Fdown +normal force
normal force = 20N + 98N = 118N?

fk = (uk)(Fn)
(14N / 118N) = uk
uk = 0.119
 
Physics news on Phys.org
You're on the right track, but not quite there yet. The box is slowing down. What's the direction of the acceleration and the net horizontal force acting on the box?
 
thanks phantomjay
summation of Fx = 25N - fk = ma
= 25N - fk = (10kg)(-1.1m/s^2)
fk = (1.1m/s^2)(10kg) +25N
fk = 36N

uk = (36N/118N)
uk = 0.305

is this right?
 
Yep, looks real good now, although you should round off the uk value to 0.3. Nice work.
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'A bead-mass oscillatory system problem'
I can't figure out how to find the velocity of the particle at 37 degrees. Basically the bead moves with velocity towards right let's call it v1. The particle moves with some velocity v2. In frame of the bead, the particle is performing circular motion. So v of particle wrt bead would be perpendicular to the string. But how would I find the velocity of particle in ground frame? I tried using vectors to figure it out and the angle is coming out to be extremely long. One equation is by work...
Back
Top