Confounded by King Arthur's knights

  • Thread starter Thread starter Phoenixtears
  • Start date Start date
AI Thread Summary
The discussion revolves around a physics problem involving projectile motion, specifically a cannonball fired from a castle wall. The user is struggling with calculations for the horizontal distance and maximum height of the cannonball, having separated the motion into horizontal and vertical components. They correctly identified the horizontal velocity but are confused about the vertical displacement and the time of flight, mistakenly assuming it is solely the height of the wall. There is a suggestion that the problem's structure requires calculating the maximum height before determining the horizontal distance, indicating a misunderstanding of the sequence of calculations needed. The conversation highlights the complexities of applying physics equations in a historical context, particularly with the anachronism of cannons in the time of King Arthur.
Phoenixtears
Messages
82
Reaction score
0

Homework Statement



King Arthur's knights fire a cannon from the top of the castle wall. The cannonball is fired at a speed of 46 m/s and at an angle of 25°. A cannonball that was accidentally dropped hits the moat below in 1.2 s.
(a) How far from the castle wall does the cannonball hit the ground?
m

(b) What is the ball's maximum height above the ground

Homework Equations


Vf= V0 +at
Deltax= V0t+ .5at^2
Vf^2= V0^2 +2ax
SOHCAHTOA

The Attempt at a Solution



I don't understand why I'm getting this wrong. I begin by separating it into two motions, horizontal and verticle. Using trigonometry I found that for the horizontal motion, the velocity was a constant 41.7 m/s. The Horizontal acceleration is 0, and the time is 1.2. I found these by using the listed equations above. 1.2 seconds is the time for both the verticle and the horizontal motions, by definition.

For the veritcle motion, the acceleration is a known -9.8, the time is constant between the two, the initial velocity is 19.4 (using the equations), the final velocity is -7.64 (using the equations), and the deltax is 16.2. Yet my answers are not working. Did I do something wrong mathematically. I've drawn the motion of the object, and I still don't understand.

I don't have the change horizontally becasue my number wasn't working right. For the second question, I made the final velocity zero horizontally (so that it was at the change of direction, the highest point) and then added that to my original 16.2. This was wrong as well. What am I doing incorrectly?
 
Physics news on Phys.org


Have you included the height of the wall? The falling cannon ball gives you the wall height.
You have the path of the fired ball correctly but then you have to all for the time for it to fall the extra wall_height.

Or perhaps it's because Arthur is a 6-8th century legend, at least 500years before cannon were general used in European battles?
 
Last edited:
I assumed that the verticle displacement was the height of the wall... I'll try to figure out if they're the same right now, and then try again.

Thank you!

PS- Physics problems never seem to be historically correct. :)
 
Last edited:
Hmm... I'm pretty sure that the verticle displacement <i>is</i> the height of the wall. Isn't the time merely given because the time is a constant? Besides, only two variables are given for the dropped cannon: 1.2 seconds and -9.8 m/s/s is the acceleration. Is it even possible to find velocity here? (To use d=vt)
 
Bah, nothing is working. I swear the answer to number two is 35.4, yet that isn't it. And for number one I use Deltax= V0t+ .5at^2 where acceleration is 0, and therefore elimiates the second part. Leaving V0t as the answer to the displacement. 41.7*1.2= 50.04, but that isn't working either.
 
Note that you have to find the total time taken for the cannonball to reach its max height and then fall to the ground. These involve two separate calculations which you then have to add up.

Anyway it looks like the question is oddly structured since you would need to find (b) before you can do (a).
 
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
Back
Top