Conservation of Energy in a roller coaster cart question

AI Thread Summary
The discussion focuses on determining the maximum height (h_max) for a roller coaster car to avoid losing contact with the track at the top of a hill, using principles of conservation of energy and Newton's second law. The key equations involve gravitational potential energy (U = mgh) and kinetic energy (K = 1/2 mv²), with emphasis on the forces acting on the car at the hill's peak. The solution reveals that the car must maintain a specific speed to stay on the track, leading to the conclusion that h_max is 1.5 times the radius (R) of the hill. When R is set to 10 meters, h_max calculates to 15 meters, confirming the derived relationship. The discussion highlights the importance of understanding both energy conservation and the forces at play in circular motion.
Risca
Messages
5
Reaction score
0

Homework Statement


A roller coaster car on the frictionless track shown in the figure below starts from rest at height h. The track's valley and hill consist of circular-shaped segments of radius R. Find the formula for the maximum height h_max for the car to start so as to not fly off the track when going over the hill. Give you're answer as a multiple of R. Show that when R = 10m, h_max =15m.

http://img152.imageshack.us/img152/181/physquestion.jpg

Homework Equations



U=mgh
K=1/2 mv2
K=1/2 I \omega2
I = mr2
\omega = v/r
where \omega is angular velocity

The Attempt at a Solution



I attempted to use simple substitutions for I and \omega and then combine the three equations so as to have a total energy of 0, but I can't seem to find a proper equation that works. Any suggestions/tips?
 
Last edited by a moderator:
Physics news on Phys.org
You need more than conservation of energy. First figure out the maximum KE it can have at the top of the hill. Hint: Newton's 2nd law applied to circular motion.

(FYI: You don't need rotational inertia for this problem.)
 
So, at the top of the hill, KE = mgh-mg(10) if I have the slightest clue as to what I'm doing in this question. I'm really unsure as to what to do after this however. I'm not seeing the relationship between the 2 separate circles and how they affect the starting height. I can understand the second "circle" affecting it as it creates a loss in kinetic and a gain in gravitational, but why does the first "circle" affect the height, if it even does.
 
Just worry about what the maximum speed (and thus maximum KE) can be at the top of the hill (the second circle). See my previous hint.

Once you find that max speed, then you can use conservation of energy.
 
Ok, so using the Newton's second law, F=ma where a in this case is radial acceleration.

a=v2/r

From here, I get v2 = (F*r)/m so that the maximum KE = 1/2F*r?

Am I supposed to be able to get an actual numerical value for v? or am I completely missing something about this problem.
 
Risca said:
Ok, so using the Newton's second law, F=ma where a in this case is radial acceleration.

a=v2/r
Excellent.

From here, I get v2 = (F*r)/m so that the maximum KE = 1/2F*r?

Am I supposed to be able to get an actual numerical value for v? or am I completely missing something about this problem.
Now analyze the forces acting on the car at the top of the hill. What criteria must be met for the car to just barely maintain contact with the road? That will tell you what F (the net force) is.
 
So, the forces at the top of the hill acting on the car are:

Fg - Force of gravity
and the force caused by the radial acceleration of the car, F=mv2/r. These two forces need to equal zero for the car to maintain contact with the road at the very top of the hill so, Fnet = mg+mv = 0.

mg = -mv2/r or, **I am slightly confused as to why I have a negative sign. I dropped it in the next equation as you can't take the sqrt of a negative number to get a real speed. My final equation seems to be correct, but the negative sign has to go somewhere. Any thoughts?

v=sqrt(gr).

subbing this into a conservation of energy equation.

mgh = 1/2 mv2 + mgr gives us

mgh = 1/2 m(gr)+mgr. m and g cancel leaving us with h = 1.5r.
thanks Doc Al.
 
Risca said:
So, the forces at the top of the hill acting on the car are:

Fg - Force of gravity
and the force caused by the radial acceleration of the car, F=mv2/r.
The forces acting on the car are: (1) gravity, which acts down, and (2) the normal force, which acts up. So the net force F = N - mg.

According to Newton, this net force must equal ma = mv^2/r, thus:
N - mg = m(-v^2/r) = -mv^2/r (note that the acceleration points down, thus is negative).
These two forces need to equal zero for the car to maintain contact with the road at the very top of the hill so, Fnet = mg+mv = 0.
The point where the car just starts to lose contact with the road will be where N = 0, thus:
N - mg = -mv^2/r →
mg = mv^2/r

(Note: mv^2/r is not a separate force acting, it's just a statement of Newton's 2nd law for circular motion.)

mg = -mv2/r or, **I am slightly confused as to why I have a negative sign. I dropped it in the next equation as you can't take the sqrt of a negative number to get a real speed. My final equation seems to be correct, but the negative sign has to go somewhere. Any thoughts?
You just made a sign error. See above for how the signs come out right if you're careful.

v=sqrt(gr).

subbing this into a conservation of energy equation.

mgh = 1/2 mv2 + mgr gives us

mgh = 1/2 m(gr)+mgr. m and g cancel leaving us with h = 1.5r.
Good!
 
Ah, gotcha. Thanks for the help, studying for first year final and this question just had me stumped.
 
Back
Top