Conservation of momentum astronaut problem

AI Thread Summary
An astronaut with a propulsion unit ejects gas at +30.9 m/s, resulting in a recoil velocity of -0.265 m/s. The astronaut's initial mass is 143 kg, and after gas ejection, it increases to 167 kg. Using the conservation of momentum, the equation needs correction to distinguish between the remaining gas and the expelled gas. The correct approach involves identifying the mass of gas left in the unit to determine the percentage of gas depleted. This problem illustrates the application of momentum conservation in a closed system.
pureouchies4717
Messages
98
Reaction score
0

Homework Statement


An astronaut in his space suit and with a propulsion unit (empty of its gas propellant) strapped to his back has a mass of 143 kg. During a space-walk, the unit, which has been filled with propellant gas, ejects some gas with a velocity of +30.9 m/s. As a result, the astronaut recoils with a velocity of -0.265 m/s. After the gas is ejected, the mass of the astronaut (now wearing a partially empty propulsion unit) is 167 kg. What percentage of the gas propellant in the completely filled propulsion unit was depleted?



Homework Equations



p=mv



The Attempt at a Solution


-.265(astronaut + gas) = 30.9 (gas)
-.265(143 + x) = 30.9x
-37.846 -.265x = 30.9x
31.165x = -37.846
x = 1.214 kg


i don't really know where to go from here... can someone please help?
 
Physics news on Phys.org
You need to distinguish between the portion of gas left in the propulsion unit and the portion of gas expelled. You should be able to immediately figure out the portion in the container from the data given. Use the conservation of momentum equation to find the portion expelled.
nick727kcin said:

The Attempt at a Solution


-.265(astronaut + gas) = 30.9 (gas)
Correct this equation. The "gas" on the left is the portion left in the unit, which should not be an unknown. And get rid of that minus sign on the left.
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Back
Top