Converting Degrees to Radians on a TI-83+

AI Thread Summary
To convert degrees to radians on a TI-83+, divide the degree measure by 180 and multiply by π. For example, 120 degrees converts to radians as 120/180 × π, resulting in approximately 2.09333 radians. Users clarified that the term "radian" refers to a unit of measurement rather than a specific key on the calculator. The discussion highlights the importance of understanding the conversion process for accurate calculations. This method is essential for solving trigonometric problems involving radians.
mrserv0n
Messages
18
Reaction score
0
Hi guys, ok 120 degrees / 180 degrees x Pie radians = 2.09 Radians

Thats the problem, and the answer Question is how do get that answer on My TI-83+
 
Physics news on Phys.org
mrserv0n said:
Hi guys, ok 120 degrees / 180 degrees x Pie radians = 2.09 Radians

Thats the problem, and the answer Question is how do get that answer on My TI-83+
The question is: what is 120 deg. in radians? 180 degrees is \pi radians so:

120\deg = \frac{120}{180}\pi = 2.09333 \text{ radians}

AM
 
Oh i get it, the way its written out on the paper made me think a radian wasnt just a title but a special key. thanks
 

Thread 'Struggling to understand the concept of this question (ice cube in water optics question)'

TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
View full post »

Thread 'Rolling without slipping on a curved surface'

Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
View full post »

Similar threads

Find the phase difference (in radians)
Replies
8
Views
3K
Where are the waves out of phase with each other by π radians?
Replies
14
Views
2K
Wave interference, "beats" problem
Replies
19
Views
1K
Centripetal Acceleration while Swinging a Stone on a String
Replies
9
Views
2K
Converting Chord Length to Radians: A Confusing Concept?
Replies
8
Views
2K
I Can the same argument be used for both radians and degrees in the sine function?
Replies
3
Views
2K
Calculate the angular acceleration of a hand - no time given
Replies
10
Views
2K
Convert 0.001 arcseconds to radians.
Replies
3
Views
2K
Calculating Power: Answer to Quads @ 180 deg/s
Replies
3
Views
2K
Why is My TI-89 Not Evaluating the Fourier Transform Correctly?
Replies
1
Views
2K

Hot Threads

Recent Insights

Back
Top