De-acceleration of cars in wreck

  • Thread starter Thread starter mljoslinak
  • Start date Start date
  • Tags Tags
    Cars
AI Thread Summary
In a head-on collision between two cars weighing 540 kg and 1400 kg, both traveling at 80 km/h, they crumple by 0.60 m and lock together. The total momentum before the collision is calculated to be 68800 kg*m/s, with kinetic energy values of 4.8*10^5 J before and 9.4*10^4 J after. The acceleration of the larger car is determined to be -130 m/s², while the smaller car experiences an acceleration of 850 m/s², indicating a change in direction. The calculations involve using the impulse-momentum theorem and the work-energy principle to relate forces, displacement, and changes in kinetic energy. The discussion emphasizes the importance of considering the direction of velocities in momentum calculations.
mljoslinak
Messages
3
Reaction score
0

Homework Statement


Two automobiles of 540 and 1400 kg collide head-on while moving at 80km/h in opposite directions. After the collision the automobiles remain locked together. The front end of each automobile crumples by 0.60 m during the collision. Find the acceleration (relative to the ground) of the passenger compartment of each automobile; make the assumption that these accelerations are constant during the collision.

v=80 km/h
m1= 540
m2= 1400
displacement =.6 m
a1= ?
a2= ?
velocity after collision=9.9 m/s

Homework Equations


P=mv
KE=(1/2)mv^2
F=ma

The Attempt at a Solution


I know the momentum is constant--(68800 kg*m/s) and the kinetic energy before and after the collision is--(4.8*10^5 J, 9.4*10^4 J). I think that m1*a1=m2*a2, not too sure about that. After that I am not sure how to calculate the de-acceleration without knowing the impact time.
 
Last edited:
Physics news on Phys.org
I haven't checked your calculations, but I'm assuming that when you calculated the total momentum of the system, you took the direction of velocities into account. As they are in opposite directions, essentially it will be (m1-m2)*v.

How did you find the velocity of the automobiles after the collision?

From what is given, each of the automobiles crumples by 0.6m. So, the work done on each automobile is F1*x=W1, etc.

From the impulse momentum theorem you have the integral of F(t)*dt=m*(delta v). This force is W1/x for car 1 and W2/x for car 2.

Also, you know the work done is equal to the change in kinetic energy (as potential energy here is constant). Thus, you can find the time taken, and the change in velocity for each car and hence the acceleration.
 
Thanks for the help. I think I solved it:
large car a= -130 m/s^2
small car a= 850 m/s^2 since the sign of the velocity switches.
 
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Struggling to make relation between elastic force and height'
Hello guys this is what I tried so far. I used the UTS to calculate the force it needs when the rope tears. My idea was to make a relationship/ function that would give me the force depending on height. Yeah i couldnt find a way to solve it. I also thought about how I could use hooks law (how it was given to me in my script) with the thought of instead of having two part of a rope id have one singular rope from the middle to the top where I could find the difference in height. But the...
Back
Top