Displacement Calculation for a Moving Cyclist

  • Thread starter Thread starter FlipMC
  • Start date Start date
AI Thread Summary
A cyclist traveling at an average velocity of 5.9 m/s for 1.2 hours needs to calculate displacement. The correct approach involves converting 1.2 hours to seconds, resulting in 4320 seconds. Using the formula for displacement, d = velocity × time, the calculation should be d = 5.9 m/s × 4320 s, which equals 25,488 meters or 25.5 km. The confusion arises from misinterpreting the units and the distinction between displacement and velocity. The final correct displacement is approximately 26 km to the west, aligning with the textbook answer.
FlipMC
Messages
12
Reaction score
0

Homework Statement



A cyclist is traveling with an average velocity of 5.9 m/s[W]. What will be his displacement after 1.2 h?

Homework Equations



d = v1▲t+½a▲t^2 ?

The Attempt at a Solution



Vavg = 5.9 m/s
▲t = 1.2 x 60 = 72 m/s

What I did was use d = v x t and I got 424m/s, which is 1, 526.4 km/h. But that's way off from my the textbook's answer which is, 26km[W]..

It sounds so easy but honestly, I'm going crazy trying to figure it out LOL :redface:.
 
Physics news on Phys.org
Cyclist is traveling with uniform velocity.
So the displacement = velocity*time.
Convert 1.2 hours to seconds
 
You got to get everything in the same units. We have velocity in m/s so we want time in seconds.

1.2 hours = 72 minutes = 4320 seconds

Then just use:

Distance = Velocity*Time
 
Thanks guys.
So I did D = 5.9m/s x 4320 which equaled to 25, 488m/s?
Then, to change it back to km/h, times 3.6 then it equaled 91, 756.8?!
What am I doing wrong? :(
 
In the problem displacement is asked, not the velocity.
 
Hm, right.. AMG, I still don't get this :'(
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Back
Top