Does Microwave support only Line of sight communication LOS?

AI Thread Summary
WiFi operates on 2.5 GHz and 5 GHz bands, which are part of the microwave spectrum, and typically requires line of sight (LOS) for optimal signal propagation. While WiFi signals are broadcasted omnidirectionally, achieving effective communication often necessitates alignment of antennas, especially over long distances. Factors such as materials in the signal path, distance, transmitter power, and antenna types significantly influence the effectiveness of LOS. For long-range connections, highly directional antennas like parabolic dishes or Yagi antennas are recommended to maintain a clear path. Overall, while WiFi can function without strict LOS, its performance can be severely impacted by obstacles and environmental conditions.
Geek007
Messages
10
Reaction score
0
Hi there,
Wifi uses either 2.5 GHZ band or 5 Ghz band and these bands lie in Microwave in EM spectrum. As i read in books, Microwaves are propagated using line of sight (LOS) technique, so sending and receiving antennas should need to be aligned accordingly. But WiFi signals are broadcasted, why? According to the rule WiFi needs to propagate signal using line of sight technique as its frequency lies under microwave spectrum.
 
Science news on Phys.org
The alternative to broadcasting (i.e. omidirectional) is to use a directional antenna. Many WiFi bases have multiple antenna elements that can be adjusted to provide some modest directionality. Even so, the signal is easily blocked by soil, metal plates, plaster, rebar, dense foliage, etc.

For example, let's connect the LANs of two distant buildings on a ranch using WiFi. We will need to use highly directional antennas at both ends of the link such as parabolic dish or eleven-element Yagi. (Each antenna are driven by WiFi routers.) You must still position both antenna so Line-of-Sight is acheived: raised above the foliage, avoiding a hill and metal barn.

My former home has plaster walls backed by expanded metal lathe. I had to carefully place the WiFi router in the basement so reception occurred through the wooden floor and doorways.
 
Hi there
welcome to PF :smile:

Geek007 said:
Hi there,
Wifi uses either 2.5 GHZ band or 5 Ghz band and these bands lie in Microwave in EM spectrum. As i read in books, Microwaves are propagated using line of sight (LOS) technique, so sending and receiving antennas should need to be aligned accordingly.

it's not so much a technique ... LOS operations is something that comes with operating on microwave frequency bands
the higher the frequency, the more important this becomes
How LOS the path between the transmitter and receiver needs to be depends on a number of factors
types of materials etc in the path, path distance, transmitter power, receiver sensitivity and types of antennas
and coaxial cable feeds at each end to name a few
for long paths 20km or more, then even eater vapour content in the atmosphere starts becoming important
Geek007 said:
But WiFi signals are broadcasted, why?

what do you mean why ?? ... doesn't really make sense

Geek007 said:
According to the rule WiFi needs to propagate signal using line of sight technique as its frequency lies under microwave spectrum.

again, it's not a technique, and I doubt you will find anything in the "rules" about suchDave
 
Last edited:
  • Like
Likes patellar-myotatic
I would like to use a pentaprism with some amount of magnification. The pentaprism will be used to reflect a real image at 90 degrees angle but I also want the reflected image to appear larger. The distance between the prism and the real image is about 70cm. The pentaprism has two reflecting sides (surfaces) with mirrored coating and two refracting sides. I understand that one of the four sides needs to be curved (spherical curvature) to achieve the magnification effect. But which of the...

Similar threads

Replies
10
Views
2K
Replies
7
Views
2K
Replies
1
Views
1K
Replies
3
Views
7K
Replies
3
Views
5K
Back
Top