Draw shear force and moment diadram

hassanthebest
Messages
4
Reaction score
0

Homework Statement


hi >>> this is my problem
http://img39.imageshack.us/img39/7979/99979361.jpg

Homework Equations





The Attempt at a Solution


need the solution >
 
Last edited by a moderator:
Physics news on Phys.org
Any ideas on how to start? Is, the distributed moment constant along the beam?
 
radou said:
Any ideas on how to start? Is, the distributed moment constant along the beam?

yes ,, its uniformally distributed.
 
Since the moment is uniform and continuous (also the weight distribution is considered uniform so the reaction forces at the supports are equal to each other), it does not vary with distance. How is the bending moment related to the shear force?
 
chrisk said:
Since the moment is uniform and continuous (also the weight distribution is considered uniform so the reaction forces at the supports are equal to each other), it does not vary with distance. How is the bending moment related to the shear force?

right so it going to to straight line >>>>

ok . ...
is there any answer else?
 
Again, how is the bending moment related to the shear? You should have covered this. It's a first order differential equation that can be solved by straightforward integration.
 
Hi, I had an exam and I completely messed up a problem. Especially one part which was necessary for the rest of the problem. Basically, I have a wormhole metric: $$(ds)^2 = -(dt)^2 + (dr)^2 + (r^2 + b^2)( (d\theta)^2 + sin^2 \theta (d\phi)^2 )$$ Where ##b=1## with an orbit only in the equatorial plane. We also know from the question that the orbit must satisfy this relationship: $$\varepsilon = \frac{1}{2} (\frac{dr}{d\tau})^2 + V_{eff}(r)$$ Ultimately, I was tasked to find the initial...
The value of H equals ## 10^{3}## in natural units, According to : https://en.wikipedia.org/wiki/Natural_units, ## t \sim 10^{-21} sec = 10^{21} Hz ##, and since ## \text{GeV} \sim 10^{24} \text{Hz } ##, ## GeV \sim 10^{24} \times 10^{-21} = 10^3 ## in natural units. So is this conversion correct? Also in the above formula, can I convert H to that natural units , since it’s a constant, while keeping k in Hz ?

Similar threads

Back
Top