Elastic Collision and speed of a ball

AI Thread Summary
In a perfectly elastic collision involving a 120 g ball moving at 4.5 m/s and a 420 g ball at 1.2 m/s, the conservation of momentum and kinetic energy principles apply. The initial calculations for the final velocity of the 420 g ball were incorrect, leading to confusion. The correct approach to find the final velocities involves using the derived formulas for elastic collisions, which account for both momentum and relative velocity. The participant successfully calculated the final velocity of the 120 g ball as 0.63 m/s but struggled with the subsequent calculations for the 420 g ball. Clarification on the correct application of equations for elastic collisions is essential for resolving the problem.
Atlos
Messages
11
Reaction score
0

Homework Statement



A 120 g ball moving to the right at 4.5 m/s catches up and collides with a 420 g ball that is moving to the right at 1.2 m/s.

If the collision is perfectly elastic, what is the speed of the 420 g ball after the collision?

Homework Equations



m_1v_{1i}+}m_2v_{2i} = m_1v_{1f}+m_2v_{2f}

The Attempt at a Solution



I manipulated the formula a little bit to solve for V2_f and came up with this:
(m_1v_{1i}+}m_2v_{2i} - m_1v_{1f}) / m_2

then I plugged in my numbers:
(.12*4.5 + .42*1.2 - .12*.63) / .42

simplified to this:
(.54 + .504 - .0756) / .42

and got 2.3057. Mastering physics said that is wrong however and I'm not sure what I'm doing wrong. Is the conservation of momentum the correct equation for this problem? I found the velocity of the 120 gram ball fine, which was .63 m/s, but am stuck on this one. Any help would be appreciated.
 
Physics news on Phys.org
Hi Atlos, welcome to PF.
How did you get v1f = 0.63 m/s?
 
I came to find v1f by using the following equation:

[(m_1-m_2) / (m_1+m_2) ]v_{1i} + [2m_2 / (m_1+m_2]v_{2i}
 
A useful fact for straight line elastic collision is that

v_2b - v_1b = - (v_2a - v_1a)

v_1a = velocity of m1 before collision
v_1b = velocity of m1 after collision etc.

Relative velocity before the collision is the same as after, just opposite in sign.
 
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Trying to understand the logic behind adding vectors with an angle between them'
My initial calculation was to subtract V1 from V2 to show that from the perspective of the second aircraft the first one is -300km/h. So i checked with ChatGPT and it said I cant just subtract them because I have an angle between them. So I dont understand the reasoning of it. Like why should a velocity be dependent on an angle? I was thinking about how it would look like if the planes where parallel to each other, and then how it look like if one is turning away and I dont see it. Since...
Back
Top