Electric potential in an open circuit

AI Thread Summary
In an open circuit, an uncharged capacitor will have a potential difference of zero, resulting in zero charge. However, if a capacitor is connected to an open voltage source and one plate has access to free charges, it can still charge without drawing current from the source. This phenomenon can be demonstrated using techniques like the Avramenko plug, where static charges can accumulate on the capacitor. The discussion highlights that traditional education may overlook the potential for capacitors to charge in open circuits, encouraging further exploration of this concept. Overall, the ability of capacitors to acquire charge in open circuits is a topic worth investigating.
yoyoloto
Messages
2
Reaction score
0
Hi,

I was wondering, if a circuit is open, would capacitors still have a potential difference ?
If there is no potential difference, can we say its potential is 0 then obtain a charge equal to 0 for the capacitor's charge ?
 
Physics news on Phys.org
Last edited by a moderator:
What I meant is that the capacitor isn't charged in the first place, the circuit is all set up and stuff but its never closed, therefore no current. So I don't think there could be any potential either, making its charge 0.
 
hi yoyoloto! :smile:

(just got up :zzz: …)
yoyoloto said:
What I meant is that the capacitor isn't charged in the first place, the circuit is all set up and stuff but its never closed, therefore no current. So I don't think there could be any potential either, making its charge 0.

oh i see!

ok, then yes, if the https://www.physicsforums.com/library.php?do=view_item&itemid=112" is uncharged, and placed into an open circuit, the potential difference (voltage) across it will remain zero, an so will the charge :smile:
 
Last edited by a moderator:
If the capacitor is uncharged, then it doesn't matter if the circuit is closed or open, the electric potential is zero. An uncharged capactor by itself is also zero electric potential.
 
The problem with schooling today. Typically, the answer is no. The capacitor will not acquire a charge connected to an open circuit and the student may build a simple lab circuit to reinforce this claim as taught. Allowing them to chug along with no further investigations with open potentials. Which is very misleading. I would encourage the student to further explore the open potential as follows and see what results you get.
Connect the capacitor across an open voltage but also connect a aerial to one plate only. Single wire. The cap will chargeup while drawing zero current from the source supply. Aka avramenko plug.
Any capacitor connected to an open voltage will indeed. Charge up so long as one of the plates has Access to free charges, including static charges along the surfaces but not closed loop back to your circuit. Remains electrically an open circuit from the source supply. Another way is an open voltage single wire with diode block to a cap and it's tank circuit closed by a spark gap. The output closed ckt having a single Earth connection but input driving side is open to the output ckt. Power can be produced via potential alone and has already been demonstrated all over the world and there are numerous patents on this technique.
 
Thread 'Motional EMF in Faraday disc, co-rotating magnet axial mean flux'
So here is the motional EMF formula. Now I understand the standard Faraday paradox that an axis symmetric field source (like a speaker motor ring magnet) has a magnetic field that is frame invariant under rotation around axis of symmetry. The field is static whether you rotate the magnet or not. So far so good. What puzzles me is this , there is a term average magnetic flux or "azimuthal mean" , this term describes the average magnetic field through the area swept by the rotating Faraday...
Back
Top