Elevator problem: energy, power, intensity,

AI Thread Summary
The discussion revolves around calculating the energy, time, and power required for an elevator with a mass of 1200 kg to ascend 100 meters. The correct energy needed is 1,176,000 Joules, calculated using the formula E = MgL, where g is 9.8 m/s². It takes 20 seconds for the elevator to rise at a speed of 5 m/s. The power supplied is calculated as P = E/t, resulting in 58.5 Watts. The initial calculations were incorrect, but the formulas used were confirmed to be accurate.
Jack Brodie
Messages
2
Reaction score
0

Homework Statement


Question: An Elevator and its load have a mass of 1200 kg.
a) what energy must be supplied to lif the elevator and its load ot a height of 100m? Answer: E = _________ Joules

b)If the elevator rises at a speed of 5 m/s, how long does it take to cover 100m? Answer t= __________ sec

c) What is the power supplied? Answer P = ________ Watts


Homework Equations


Energy: E=MgL, where g=9.8m/s2 (squared) is the acceleration of gravity and Lis the distance through which a mass is moved against the force of gravity
Power: P = E/t
Intensity: I= P/A


The Attempt at a Solution



My answers:
For part a, I used the first equation (E=MgL) and I got the answer of 1176 Joules

part b: at a rate of 5 m/s it would take 20 seconds; so t = 20 seconds

Part c: P=E/t is P= 1176/20 = 58.5 watts


Does this seem right?
 
Physics news on Phys.org
The answer to the first one should be 1176000 Joules, but your formulas are correct.
 
Thank you for taking time to help! I appreciate it!
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'A bead-mass oscillatory system problem'
I can't figure out how to find the velocity of the particle at 37 degrees. Basically the bead moves with velocity towards right let's call it v1. The particle moves with some velocity v2. In frame of the bead, the particle is performing circular motion. So v of particle wrt bead would be perpendicular to the string. But how would I find the velocity of particle in ground frame? I tried using vectors to figure it out and the angle is coming out to be extremely long. One equation is by work...
Back
Top