Energy in simple harmonic motion--car problem

AI Thread Summary
The discussion centers on a calculation error in determining the total energy of a car in simple harmonic motion. The original poster calculated total energy as 8*10^-6 joules, while the book states it should be 400 joules. The confusion arose from an arithmetic mistake in calculating the spring constant k, where the poster incorrectly used 10^-4 instead of 10^4. Clarifications were made regarding the correct formulas for total energy and maximum velocity in harmonic motion. Ultimately, the poster acknowledged the error and expressed gratitude for the assistance received.
Brian_D
Gold Member
Messages
77
Reaction score
16
Homework Statement
A 1400-kg car with poor shock absorbers is bouncing down the highway at 20 m/s, executing vertical harmonic motion at 0.67 Hz. If the amplitude of the oscillations is 18 cm, what is the total energy in the oscillations? What fraction of the car's kinetic energy is this? Neglect rotational energy of the wheels and the fact that not all the car's mass participates in the oscillations.
Relevant Equations
I am only working on the first part of this problem (total energy in the oscillations). The relevant equations are: $$total energy=.5*m*(Vmax)^2+.5kA^2$$ $$k=mw^2$$ $$Vmax=A*sqrt(k/m)$$
Using the above equations and the given information, I get ##k=2.48*10^-4## 2.47∗10−4max=7.56∗10−5##Vmax=7.58*10^-5## and ##total energy=8*10^-6 joules##. My answer is clearly the wrong order of magnitude. The book answer key says 400 joules. My calculation for total energy was: ##.5*1400*(7.58*10^-5)^2+.5*(2.48*10^-4)*.18^2 = 8*10^-6 joules. Where am I going wrong?
 
Physics news on Phys.org
Brian_D said:
The relevant equations are: $$total energy=.5*m*(Vmax)^2+.5kA^2$$ $$k=mw^2$$ $$Vmax=A*sqrt(k/m)$$
That is not right. At any instant, velocity v, displacement x, the total energy is ##\frac 12mv^2+\frac 12kx^2##. At max velocity, x=0, and at displacement A, v=0. So it ##=.5*m*(V_{max})^2=.5kA^2##.

How do you get that value for k?
 
Thank you, haruspex. Your post is not showing up on my computer (I get an ad for software instead). But I saw a version of your post in the email from PhysicsForums and in that you said that the answer is ##.5*m*(V_{max})^2=.5kA^2## When I calculate the first expression, I get ##.5*1400*(7.58*10^-5)^2##, which equals ##4.0*10^-6 joules## and I get a similar value for the second expression. So why is the order of magnitude so far off base? The answer that the book gives is 400 joules.
 
haruspex, now your post is displaying correctly; I am checking my calculation for k.
 
Another mystery solved. I made a simple arithmetic error in calculating k (I used ##10^-4## instead of #10^4##. I checked this twice and made the same mistake both times! Thanks for your help, haruspex.
 
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
Back
Top