Ethel Alcohol vs Steam: Power Plant Turbines

  • Thread starter Thread starter mat337d
  • Start date Start date
  • Tags Tags
    Alcohol Steam
AI Thread Summary
Steam is commonly used to turn turbines in power plants due to its efficiency and safety compared to ethanol. Although ethanol has a lower heat of vaporization and could theoretically produce more vapor for energy generation, it poses significant risks due to its high combustibility and the need for specialized handling. The costs associated with safety measures and training for workers make ethanol impractical for widespread use in power generation. In some regions, like Brazil, ethanol is utilized as a fuel alternative, but it requires engine modifications. Overall, while ethanol could offer higher efficiency, its dangers and costs render it unviable for conventional power plants.
mat337d
Messages
16
Reaction score
0
I have been told steam is used to turn turbines in a power plant. Why wouldn't they use ethel alcohol? It
has a lower heat of vaporization. So if I am not mistaken you would produce roughly twice as much ethel vapor to turn a turbine quicker generating more energy.Any help would be appriciated.
 
Physics news on Phys.org
the problem with heating alcohol isthat its highly combustable and not cheaply available (not as cheap as water in the long run). So whilst you would produce more vapour or alcoholic steam, you would have to be careful to control the heat input or you could end up with a rather large and damaging fireball. Also people working with the alcohol would have to have special training and equipment etc. to use it which adds more to cost which in a business sense is really not viable. Simply put its too dangerous and too expensive.

On a different note alcohol is used in Brazil and other south american countries where they can produce vast quantities from sugar cane srocks as a cheap alternative to petroleum. The engines have to be adapted i believe so i wouldn't try it on your own car.
 
Thank you Kurdt.
So it is physically possible to gain a higher efficiency from ethel but not practical in a business sense.
 
I think it's easist first to watch a short vidio clip I find these videos very relaxing to watch .. I got to thinking is this being done in the most efficient way? The sand has to be suspended in the water to move it to the outlet ... The faster the water , the more turbulance and the sand stays suspended, so it seems to me the rule of thumb is the hose be aimed towards the outlet at all times .. Many times the workers hit the sand directly which will greatly reduce the water...

Similar threads

Back
Top