What Happens to Charge and Energy When Connecting Capacitors in Parallel?

  • Thread starter Thread starter desmal
  • Start date Start date
  • Tags Tags
    Capacitors Energy
AI Thread Summary
When connecting an uncharged capacitor in parallel with a fully charged capacitor of equal capacitance, the charge distribution changes due to the conservation of charge and energy principles. The initial energy stored in the charged capacitor is equal to the energy after connection, but energy losses occur, resulting in less total energy in the system. The final voltage across both capacitors is Vf = Vi/sqrt(2), leading to a total charge Qt that appears to contradict the initial charge. While charge is conserved, energy is not, as some energy is dissipated as heat during the process. This highlights the distinction between charge conservation and energy conservation in capacitor circuits.
desmal
Messages
23
Reaction score
0
I am not sure if I have full understanding of capacitors energy, because I found a contradiction in solving one problem. The problem is: -
If an uncharged capacitor connected to another fully charged capacitor in parallel, what will be the new charge distribution on both capacitors? “Assuming equal capacitance”
I believe we have two rules of respect:-
1- Conservation of charge
2- Conservation of energy
If we assume that C = capacitance, and Vi = initial voltage and Qi=the initial charge on the charged capacitance.
Let the energy before connecting the two capacitance equal to the energy after linking them together:-

0.5*C*Vi^2 = 0.5*(2C)*Vf^2
then: - Vf=Vi/sqrt(2)

Know consider the total charge after linking both capacitors:-

Qt = Ct * Vf= (2C)*Vi/sqrt(2)=C*Vi*sqrt(2)

Which is obviously not equal to C*Vi “the initial charge”.

I am confused which one of these two fundamental concepts I have to base my calculation in, and why it doesn’t work with the other concept.
 
Engineering news on Phys.org
Charge is conserved as is energy, however,when the capacitors are joined together charge flows through the connecting wires and electrical energy is converted to heat energy this being dissipated to the surroundings.The result is that the energy stored in the field of the capacitor combination is less than the energy stored in the single capacitor that was originally charged,the amount of charge,however, is the same.
 
Hey guys. I have a question related to electricity and alternating current. Say an alien fictional society developed electricity, and settled on a standard like 73V AC current at 46 Hz. How would appliances be designed, and what impact would the lower frequency and voltage have on transformers, wiring, TVs, computers, LEDs, motors, and heating, assuming the laws of physics and technology are the same as on Earth?
While I was rolling out a shielded cable, a though came to my mind - what happens to the current flow in the cable if there came a short between the wire and the shield in both ends of the cable? For simplicity, lets assume a 1-wire copper wire wrapped in an aluminum shield. The wire and the shield has the same cross section area. There are insulating material between them, and in both ends there is a short between them. My first thought, the total resistance of the cable would be reduced...
I used to be an HVAC technician. One time I had a service call in which there was no power to the thermostat. The thermostat did not have power because the fuse in the air handler was blown. The fuse in the air handler was blown because there was a low voltage short. The rubber coating on one of the thermostat wires was chewed off by a rodent. The exposed metal in the thermostat wire was touching the metal cabinet of the air handler. This was a low voltage short. This low voltage...
Back
Top