Expression for the time average power dissipated in a resistance R

paulb42
Messages
1
Reaction score
0

Homework Statement



A square loop with side-length a is positioned at the centre of a long thin solenoid, which has
radius r (with r > a), length l and N turns. The plane of the loop is perpendicular to the
5axis of the solenoid. A current I = I0 sin ωt flows through the loop. Derive an expression for
the time-averaged power dissipated in a resistance R connected between the terminals of the
solenoid. You may assume that R is much greater than the resistance of the solenoid and
that the self-inductance of the solenoid is negligible.


Homework Equations




P = J E d (this is meant to be the integral of the total volume of the shape in question)
P = I^2 * R

The Attempt at a Solution



I understand how the power dissipated is calculated over a macroscopic object. But how does this change when it is the referring to a solenoid and the terminals?
 
Physics news on Phys.org
The power is dissipated in R. Neglect any dissipated in the solenoid, because its resistance is negligible compared to that of R. [Not that there would be any problem with calculating the power in the solenoid if we had to - it's only a piece of wire, but wound into a coil !]

But first you need to find the emf induced in the solenoid. Look up 'mutual inductance', or work from Faraday's Law.
 
Hello everyone, I’m considering a point charge q that oscillates harmonically about the origin along the z-axis, e.g. $$z_{q}(t)= A\sin(wt)$$ In a strongly simplified / quasi-instantaneous approximation I ignore retardation and take the electric field at the position ##r=(x,y,z)## simply to be the “Coulomb field at the charge’s instantaneous position”: $$E(r,t)=\frac{q}{4\pi\varepsilon_{0}}\frac{r-r_{q}(t)}{||r-r_{q}(t)||^{3}}$$ with $$r_{q}(t)=(0,0,z_{q}(t))$$ (I’m aware this isn’t...
Hi, I had an exam and I completely messed up a problem. Especially one part which was necessary for the rest of the problem. Basically, I have a wormhole metric: $$(ds)^2 = -(dt)^2 + (dr)^2 + (r^2 + b^2)( (d\theta)^2 + sin^2 \theta (d\phi)^2 )$$ Where ##b=1## with an orbit only in the equatorial plane. We also know from the question that the orbit must satisfy this relationship: $$\varepsilon = \frac{1}{2} (\frac{dr}{d\tau})^2 + V_{eff}(r)$$ Ultimately, I was tasked to find the initial...
Back
Top