Failure to Start: Causes & Costs of Indy Cars

  • Thread starter Thread starter Janitor
  • Start date Start date
  • Tags Tags
    Failure
AI Thread Summary
Indy cars frequently fail to start due to various mechanical issues, including gearbox failures, which are common at high RPMs. The cost of an Indy car is substantial, factoring in materials, construction, research and development, and team expenses, often totaling millions. Engine tuning for optimal performance at high RPMs complicates starting issues, especially under varying weather conditions. Instances of cars not starting on race day, even after functioning well the day before, highlight the unpredictability of racing. Historical incidents, such as a driver who crashed and was hospitalized, remain memorable but often leave questions about their current status in racing.
Janitor
Science Advisor
Messages
1,107
Reaction score
1
Um, "Failure to start."

I can kind of understand that in most Indianapolis 500 races cars suffer gearbox failures that put them out of the race. The RPM involved are much higher than for a street car. But many times I have seen cars towed away from the start line due to not starting. What is the explanation for this? How much does an Indy car cost? My vehicle has a Bluebook value of $800, and it fails to start once every four years when the battery fails. Even then, I can get it started by pushing it.
 
Engineering news on Phys.org
How much does the car cost is difficult, do you go by just the materials and time to construct or factor in the R&D and expenses to bring the team of support people. Millions either way.

But the engine is tuned to work at 14,000 RPM and produce its power up there. Turning over at 500 RPM doesn't exactly fall into the powerband where the airflow has been optimized.

But I agree, with all that money on the line it doesn't make sense to show up and not play the game.

Cliff
 
Good point about aspiration. But it seems like if it started okay the day before, it should start okay on race day, even if the temperature and humidity in Indianapolis are a bit different than they were.

One driver today could not get started until all the others were well into the pace lap, but finally he got underway.

What with rain delays, the race is still going on. A car owned by David Letterman is leading.

I remember about five or ten years ago at Indy, there was a crash that broke the nose off of a car. You could see the driver's shoes dragging on the pavement as the his car rolled to a stop. They took him to the hospital, and I never heard any more about him. Can anybody remember who the driver was, and is he racing again? His first or last name may have been Paul.
 
Posted June 2024 - 15 years after starting this class. I have learned a whole lot. To get to the short course on making your stock car, late model, hobby stock E-mod handle, look at the index below. Read all posts on Roll Center, Jacking effect and Why does car drive straight to the wall when I gas it? Also read You really have two race cars. This will cover 90% of problems you have. Simply put, the car pushes going in and is loose coming out. You do not have enuff downforce on the right...
I'm trying to decide what size and type of galvanized steel I need for 2 cantilever extensions. The cantilever is 5 ft. The space between the two cantilever arms is a 17 ft Gap the center 7 ft of the 17 ft Gap we'll need to Bear approximately 17,000 lb spread evenly from the front of the cantilever to the back of the cantilever over 5 ft. I will put support beams across these cantilever arms to support the load evenly
Thread 'What's the most likely cause for this carbon seal crack?'
We have a molded carbon graphite seal that is used in an inline axial piston, variable displacement hydraulic pump. One of our customers reported that, when using the “A” parts in the past, they only needed to replace them due to normal wear. However, after switching to our parts, the replacement cycle seems to be much shorter due to “broken” or “cracked” failures. This issue was identified after hydraulic fluid leakage was observed. According to their records, the same problem has occurred...
Back
Top