Fault analysis in power systems

AI Thread Summary
The discussion centers on seeking resources for fault analysis in high-voltage AC power systems. Participants request clarification on the specific issues related to fault detection, isolation, and root cause analysis. A technical paper on fault analysis is recommended, along with a link to a company offering relevant training. The conversation emphasizes the importance of detailing specific research needs to receive targeted assistance. Overall, the thread highlights the community's willingness to share knowledge and resources for advancing research in this area.
abimcdssi
Messages
3
Reaction score
0
I would like to know relevant materials/links that would help ma further my research in fault analysis.Thanks
 
Engineering news on Phys.org
abimcdssi said:
I would like to know relevant materials/links that would help ma further my research in fault analysis.Thanks

hi there
welcome to PF

would you like to elaborate a bit please the question is a bit vague

are you dealing with DC or AC systems ? or both?
hi or low voltage ?

Dave
 
hello Dave,
I'm dealing with AC systems for now. high voltage
would like to hear from you soon
abimcdssi.
 
abimcdssi, I welcome you here, also! There are several processes here...detecting a fault, isolating a fault, building redundancy to protect critical loads, and, of course, determining the root cause of the fault. I think all this is under the heading of "fault analysis". So, will you please describe your issue in more detail? Say exactly what you are trying to do, please.
Bobbywhyedit: Have you read this technical paper?
www.elect.mrt.ac.lk/EE423_ Fault_Analysis_Notes.pdf

Here's a company that seems to do what you are asking about:
http://www.avotraining.com/ps-overview.php?gclid=COqhr6yf6q8CFYla7AodmDF02g
 
Last edited by a moderator:
more of balanced and unbalanced fault analysis
 

Thread '3-terminal device external modeling'

Very basic question. Consider a 3-terminal device with terminals say A,B,C. Kirchhoff Current Law (KCL) and Kirchhoff Voltage Law (KVL) establish two relationships between the 3 currents entering the terminals and the 3 terminal's voltage pairs respectively. So we have 2 equations in 6 unknowns. To proceed further we need two more (independent) equations in order to solve the circuit the 3-terminal device is connected to (basically one treats such a device as an unbalanced two-port...
View full post »

Thread 'Question about the voltage between two charged capacitors'

suppose you have two capacitors with a 0.1 Farad value and 12 VDC rating. label these as A and B. label the terminals of each as 1 and 2. you also have a voltmeter with a 40 volt linear range for DC. you also have a 9 volt DC power supply fed by mains. you charge each capacitor to 9 volts with terminal 1 being - (negative) and terminal 2 being + (positive). you connect the voltmeter to terminal A2 and to terminal B1. does it read any voltage? can - of one capacitor discharge + of the...
View full post »

Similar threads

Maximum power from a transformer
Replies
8
Views
3K
Lorentz Force In Capacitors
Replies
15
Views
2K
Fault analysis and symmetrical components in Power Grids
Replies
3
Views
3K
Ground faults in ungrounded systems
Replies
10
Views
5K
Finding Reactance from System Fault Level
Replies
1
Views
1K
Fault in ungrounded system -> zero sequence voltage
Replies
1
Views
3K
Help with magnetic force from fault current on overhead wire
Replies
6
Views
4K
Difference between electrical and thermal faults?
Replies
4
Views
4K
Force on conductors during a short circuit fault
Replies
9
Views
4K
Troubleshooting my LG plasma TV - no picture display
Replies
6
Views
4K

Hot Threads

Recent Insights

Back
Top