Finding deceleration of a ball?

AI Thread Summary
To find the deceleration of a ball hit by a bat, the problem provides the mass (0.1 kg), force (20 N), and the duration of the hit (0.01 s). The ball accelerates at 200 m/s² and initially is at rest before being hit. The confusion arises from the calculation of deceleration, where the correct answer is 2 m/s², but the method used led to an incorrect result of -200 m/s². Clarification is needed on how to properly apply the acceleration formula to find the deceleration. Understanding the initial state of the ball and the provided values is crucial for solving the problem accurately.
Amelina Yoo
Messages
14
Reaction score
0

Homework Statement


How to find deceleration of a ball that is hit, given the ball:
mass=0.1kg
F=20N
is hit by a bat for 0.01s
has an acceleration of 200ms^-2 when hit by bat
speed=2m per sec
travels 0.01m as it is being hit by the bat
Was initially at rest.

Homework Equations


a=(v-u)/t

The Attempt at a Solution


Using the acceleration formula, I had swapped the positions of u and t, resulting in -200ms^-2, which is wrong. The answer is 2ms^-2, and I am not sure how to go about this. Please help me in getting this qu started! Thank you!
 
Last edited:
Physics news on Phys.org
I'm nit sure I understand the problem. What is the initial state of the ball before being hit?
 
DrClaude said:
I'm nit sure I understand the problem. What is the initial state of the ball before being hit?
The ball was at rest, and then it was hit by a bat.

Sorry! I will include it in the above now.
 
Ok. And is the following information
Amelina Yoo said:
mass=0.1kg
F=20N
is hit by a bat for 0.01s
has an acceleration of 200ms^-2
speed=2m per sec
travels 0.01m as it is hit by the bat
all given in the problem, or did you calculate some of those values?
 
DrClaude said:
Ok. And is the following information

all given in the problem, or did you calculate some of those values?
The mass, force, and time was given in the question, and the remainder I calculated.
The ones I calculated are correct, when referring to the answers.
 
This is muddled. Please always post the question as it is asked (that's the only thing that should appear in the first section of the template). I don't understand the deceleration that is mentioned.

So, what exactly is the question being asked?
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Back
Top