Finding the force on a spring (Fs)?

  • Thread starter Thread starter MuffinMerc
  • Start date Start date
  • Tags Tags
    Force Spring
AI Thread Summary
To find the force on a spring (Fs), the equation Fs = mass × gravity is applicable, but the results must align with Hooke's Law, which states that Fs = -kx. The user provided data from a lab experiment with varying weights and corresponding spring extensions, but noted discrepancies in the expected linear relationship on the graph. Feedback indicated potential measurement errors, particularly with the extension values, suggesting corrections were needed for accurate calculations. After addressing a typing error, the user is encouraged to re-evaluate the data for consistency with the expected linearity of the graph.
MuffinMerc
Messages
2
Reaction score
0

Homework Statement


I'm trying to find the force of a spring (Fs) from the mass of the weights, and the extension of the spring. The springs length without a weight attached was 5 cm. The lab we did had us put 5 different weights on the same spring, and graph the results.

My results from the lab:
0.05 kg, spring stretched 0.021 meters.
0.1 kg, spring stretched 0.055 meters.
0.2 kg, spring stretched 0.115 meters.
0.3 kg, spring stretched 0.18 meters.
0.4 kg, spring stretched 0.25 meters.

Now, I don't know how to figure out the Fs (force on the spring) on each of these 5 results.

Homework Equations



I'm asking for an equation that can help me. So far, Fs=-kx has proven useless at the moment.

The Attempt at a Solution


My lab partner used Fs=mass X gravity to find force spring. I'm not sure if this is correct, because on the graph (Fs vs extension (x) graph) the line is supposed to be linear and straight, but my graph with the plotted points looks nothing like that when the dots are connected.

Any help would be appreciated.
 
Last edited:
Physics news on Phys.org
Looks like you have some measurement errors. If it stretched 0.115 m with .2 kg, then with .1 kg, it ought to stretch half as much, or about 0.055 m or so. Did you miss a decimal point?
 
PhanthomJay said:
Looks like you have some measurement errors. If it stretched 0.115 m with .2 kg, then with .1 kg, it ought to stretch half as much, or about 0.055 m or so. Did you miss a decimal point?
Oh yes, you're right! Typing error, I fixed that now.

Should make a little bit more sense now.
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Thread 'Trying to understand the logic behind adding vectors with an angle between them'
My initial calculation was to subtract V1 from V2 to show that from the perspective of the second aircraft the first one is -300km/h. So i checked with ChatGPT and it said I cant just subtract them because I have an angle between them. So I dont understand the reasoning of it. Like why should a velocity be dependent on an angle? I was thinking about how it would look like if the planes where parallel to each other, and then how it look like if one is turning away and I dont see it. Since...
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Back
Top