Finding the Work done on a Ride?

  • Thread starter Thread starter ilovemynny
  • Start date Start date
  • Tags Tags
    Work Work done
AI Thread Summary
To calculate the work done on a child riding the Batwing at Six Flags, the correct formula is W = F * s * cos(θ), where F is the force, s is the distance, and θ is the angle of incline. The force is determined by multiplying the child's mass (43 kg) by gravitational acceleration (9.81 m/s²), resulting in 421.83 N. The work calculation initially attempted used the cosine of the incline angle, but the correct approach involves using the sine function to find the height. A free body diagram is recommended to clarify the direction of forces and the angle used in calculations. Understanding the distinction between using sine and cosine in this context is essential for accurate work calculations.
ilovemynny
Messages
24
Reaction score
0
Finding the Work done on a Ride?

Homework Statement



The lift incline on the Batwing ride at Six Flags America, is 66.2 m long and has an incline of 32.0 degrees. How much work is done to take a 43 Kg child to the top of the hill?

Homework Equations


W = FsCos
I don't know if this is the right formula to use!

The Attempt at a Solution


If this is the right formula to use would the solution go like this:
F = 43 Kg x 9.81 m/s/s
F = 421.83N

W = FsCos
W = 421.83N x 66.2 m x (Cos 32)
W = 23681.8669
W = 24000 J

Is this right, or did I do this wrong? If I did do this wrong can someone help me?
 
Physics news on Phys.org


You should do a free body diagram. You have a problem in how You chose your angle or do your trig.You can also do the problem using energy methods.
 


wait wait what if I did this instead?
W = 421.83N x 66.2 m x (Sin 32)
 


ilovemynny said:
wait wait what if I did this instead?
W = 421.83N x 66.2 m x (Sin 32)

This is correct but do you understand why? Can you solve it using energy?
 


actually no >.> my previous questions used the sin when finding height
but when i looked up the formula for work with angles it gave me cos.
can you tell me why?
 


ilovemynny said:
actually no >.> my previous questions used the sin when finding height
but when i looked up the formula for work with angles it gave me cos.
can you tell me why?
Ok. W=F* cos(a)*s is the definition of work when we have an abject moving in a straight line. It means that work is equal to the component of the Force acting on the same direction as the objects movement.If you have force acting in the same direction as the object moves the angle is 0 and W=Fs if the force acts at a angle W=F* cos(a)*s.The thing is that you don't use this formula to plug random things in it.You must figure out what is the displacement "s", what is the direction of the objects movement and at what angle "a" does the force does with that direction. You do that by making a Free Body diagram.
 
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Trying to understand the logic behind adding vectors with an angle between them'
My initial calculation was to subtract V1 from V2 to show that from the perspective of the second aircraft the first one is -300km/h. So i checked with ChatGPT and it said I cant just subtract them because I have an angle between them. So I dont understand the reasoning of it. Like why should a velocity be dependent on an angle? I was thinking about how it would look like if the planes where parallel to each other, and then how it look like if one is turning away and I dont see it. Since...
Back
Top