Finding Velocity from Position: How to Use Limits

  • Thread starter Thread starter Chris Carney
  • Start date Start date
  • Tags Tags
    Particle Position
AI Thread Summary
The position of a particle moving along the x-axis is given by the equation x = 6t², allowing for straightforward calculations of position at specific times. At t = 2.5 seconds, the position is evaluated to be 37.5 meters. For the second part, substituting t with 2.5 + Δt leads to the expression 6(2.5 + Δt)². To find the velocity at t = 2.5 seconds, the limit of Δx/Δt is calculated as Δt approaches zero, resulting in a velocity of 30 m/s. This process involves algebraic manipulation of the position equation to isolate and evaluate the limit.
Chris Carney
Messages
5
Reaction score
0

Homework Statement


The position of a particle moving along the x axis varies in time according to the expression x = 6t2, where x is in meters and t is in seconds. Evaluate its position at the following times.
(a) t=2.5s
(b) t=2.5s + Δt
(c) Evaluate the limit of Δxt as Δt approaches zero to find the velocity at t = 2.50 s.

Homework Equations


Δxt

The Attempt at a Solution


(a) was simple, just plug in 2.5s and get 37.5m
(b) the problem doesn't explain well enough, but i finally got it, plug in 2.5 + Δt for t and I got 6(2.5 + Δt)^2
(c) I don't even know how to do this, it's been 4 years since I've taken classes of higher math and I must have forgotten most. The answer provided is 30 but I don't know the steps to get there.
 
Physics news on Phys.org
Chris Carney said:

Homework Statement


The position of a particle moving along the x axis varies in time according to the expression x = 6t2, where x is in meters and t is in seconds. Evaluate its position at the following times.
(a) t=2.5s
(b) t=2.5s + Δt
(c) Evaluate the limit of Δxt as Δt approaches zero to find the velocity at t = 2.50 s.

Homework Equations


Δxt

The Attempt at a Solution


(a) was simple, just plug in 2.5s and get 37.5m
(b) the problem doesn't explain well enough, but i finally got it, plug in 2.5 + Δt for t and I got 6(2.5 + Δt)^2
(c) I don't even know how to do this, it's been 4 years since I've taken classes of higher math and I must have forgotten most. The answer provided is 30 but I don't know the steps to get there.

For step c, you need to calculate Δx, which is just the difference in positions of the particle at time t + Δt and at time t. Divide the change in position of the particle, which occurs over the time interval Δt, by Δt and take the limit. Once you do some algebra on this quotient, taking the limit as Δt approaches zero may not be as scary.
 
I found another problem worked out on this website, so what I did was 6(2.5+Δt)(2.5+Δt) to get 6Δt^2 + 30Δt + 37.5, this equation is x + Δx, so I have to remove the original x of 37.5, leaving me with Δx = 6Δt^2 + 30Δt. take this and put it over Δt to get 6Δt + 30, and plug in 0 for Δt because Δt is going to 0. and I got 30.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top