Flexural Wave Propagation speed

AI Thread Summary
The discussion centers on finding the formula for flexural wave propagation speed in beams, specifically addressing whether the inquiry pertains to longitudinal or transverse waves. The original poster is a master's student in mechanical engineering and has some foundational knowledge of wave types. Participants encourage sharing relevant equations and resources to provide better guidance. Clarification on the specific type of wave is deemed necessary for accurate assistance. The conversation emphasizes the importance of foundational knowledge in addressing the problem effectively.
billu
Messages
3
Reaction score
0
Hello Everyone,

my question is that what's the formula or equation to find flexural wave propagation speed along the beam??

Please guide with this, I am kind of stuck in this problem.

Thanks in advance,waiting for the response...
 
Engineering news on Phys.org
billu said:
Hello Everyone,

my question is that what's the formula or equation to find flexural wave propagation speed along the beam??

Please guide with this, I am kind of stuck in this problem.

Thanks in advance,waiting for the response...
I'd mentioned in your introduction thread that you should post links to what you have been reading, so we can judge how best to help you. What level are you in school right now? Are you in university studying Mechanical Engineering?

Are you asking about longitudinal or transverse mechanical waves in the beam?
 
berkeman said:
I'd mentioned in your introduction thread that you should post links to what you have been reading, so we can judge how best to help you. What level are you in school right now? Are you in university studying Mechanical Engineering?

Are you asking about longitudinal or transverse mechanical waves in the beam?
I am masters student in hanyang UNiversity South Korea. Doing engineering,yEa.
 
berkeman said:
Are you asking about longitudinal or transverse mechanical waves in the beam?
And what equations have you learned so far for such waves in solids?
 
I have learned about tranverse waves, longitudinal waves, shear waves.
 
billu said:
I have learned about tranverse waves, longitudinal waves, shear waves.
Good. :smile: Can you then post some of the equations that you asked about in your first post above?
 
How did you find PF?: Via Google search Hi, I have a vessel I 3D printed to investigate single bubble rise. The vessel has a 4 mm gap separated by acrylic panels. This is essentially my viewing chamber where I can record the bubble motion. The vessel is open to atmosphere. The bubble generation mechanism is composed of a syringe pump and glass capillary tube (Internal Diameter of 0.45 mm). I connect a 1/4” air line hose from the syringe to the capillary The bubble is formed at the tip...
Thread 'Physics of Stretch: What pressure does a band apply on a cylinder?'
Scenario 1 (figure 1) A continuous loop of elastic material is stretched around two metal bars. The top bar is attached to a load cell that reads force. The lower bar can be moved downwards to stretch the elastic material. The lower bar is moved downwards until the two bars are 1190mm apart, stretching the elastic material. The bars are 5mm thick, so the total internal loop length is 1200mm (1190mm + 5mm + 5mm). At this level of stretch, the load cell reads 45N tensile force. Key numbers...
I'd like to create a thread with links to 3-D Printer resources, including printers and software package suggestions. My motivations are selfish, as I have a 3-D printed project that I'm working on, and I'd like to buy a simple printer and use low cost software to make the first prototype. There are some previous threads about 3-D printing like this: https://www.physicsforums.com/threads/are-3d-printers-easy-to-use-yet.917489/ but none that address the overall topic (unless I've missed...

Similar threads

Back
Top