Fluid Dynamics: quickest way to pour water out of a bottle

AI Thread Summary
The discussion focuses on the quickest methods to pour water from a bottle, particularly for a 4000-word essay. One effective technique mentioned is using a bendy straw, which helps equalize pressure and allows water to flow faster. Another method involves swirling the bottle to create a vortex, facilitating air entry and enhancing the pouring speed. The effectiveness of these methods has been observed in demonstrations, particularly with bottles like Perrier. Overall, understanding fluid dynamics and pressure relationships is crucial for optimizing water flow from a bottle.
blondnc
Messages
3
Reaction score
0
I am doing a 4000 word essay on the quickest way to pour water out of a bottle and i need some help with the theory and formulas etc. I've tried looking but this experiment isn't well documented so any help would be great!
 
Physics news on Phys.org
Well, from experience, the strawpedo works pretty well. If you stick a bendy straw in the bottle, it will come out a lot faster.

I think this is because it equalises pressure in the bottle. Otherwise, there is a lower pressure which causes the water to slow down.

Hopefully someone can give you a better answer.
 
The "how" answer is to swirl the bottle so that a vortex forms a funnel allowing air up to the bottom of the bottle. When I have seen it demonstrated, in the lecture that you may have missed, it was done with two perrier bottles, I am not sure that was to maximise the effectiveness of the demonstration but it was very noticible that the "swirled" bottle emptied quickest.
 
im aware at botht but i wanted to focus on it without using extra apparatus etc to look at angles and relationships between neck sizes
 
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Back
Top