Free fall acceleration of rocket

AI Thread Summary
The discussion revolves around calculating the acceleration of a rocket after a bolt falls off during its ascent. The user initially calculated the rocket's acceleration as 22.05 m/s² but found a discrepancy with the book's answer of 5.5 m/s². Key to resolving this is recognizing that the bolt's initial velocity is not zero; it equals the rocket's upward velocity at the moment it detaches. To find this initial velocity, equations of motion can be applied, considering the rocket's ascent for 4 seconds and the bolt's subsequent fall for 6 seconds. Properly incorporating these values and signs is crucial for arriving at the correct answer.
rich1116
Messages
3
Reaction score
0
can someone please help me??

I thought I had the answer to this problem, but it doesn't match the book's answer. I can't figure out what I'm doing wrong. This is the problem:

A rocket is launched straight up with constant acceleration. 4 seconds after liftoff, a bolt falls off the rocket and hits the ground 6 seconds later. What was the rocket's acceleration?

First, I used the free fall acceleration of the bolt, -9.80m/s2 and 6 seconds that if fell for to find its position when it fell off the rocket, which I found to be 176.4m. This would also be the height of the rocket when the bolt fell of. Since the rocket traveled for 4 sec to reach this height, I used this height and time to find the acceleration of the rocket, 22.05m/s2.
The book answer however is 5.5 m/s2.
What am I doing wrong?
 
Physics news on Phys.org


Hello rich.You took the initial velocity of the bolt to be zero.It is not zero it is the upward velocity that the rocket has at the instant the bolt drops.
 


then how do i find the initial velocity?
 


You can write it in symbol form.
 


i can but symbols won't due me any good. i need a definite numerical answer to the question. i know i can write a bunch of equations but i have no numbers to put into them
 


Consider the rocket having risen for 4 seconds
u=0, t=4, a=a(unknown)
you can write v=4a and s=8a(equations of motion)
Now consider the bolt
u=4a, a=9.8,t=6, s=8a(this is the displacement not the distance traveled because the bolt rises a bit before it comes to momentary rest and then falls)
Using the values above write down the equation connecting s,u,a(9.8 and not to be confused with a for the rocket)) and t,plug in the numbers and solve.Make sure you get the minus sign in front of ut ie the displacement and acceleration are down whereas u is up.Good luck with it.
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Trying to understand the logic behind adding vectors with an angle between them'
My initial calculation was to subtract V1 from V2 to show that from the perspective of the second aircraft the first one is -300km/h. So i checked with ChatGPT and it said I cant just subtract them because I have an angle between them. So I dont understand the reasoning of it. Like why should a velocity be dependent on an angle? I was thinking about how it would look like if the planes where parallel to each other, and then how it look like if one is turning away and I dont see it. Since...
Back
Top