Frequency of oscillation problem

AI Thread Summary
The discussion revolves around calculating the frequency of oscillation and related parameters for a mass-spring system. The spring constant was determined to be 1.96 N/m using Hooke's Law, leading to a total energy of 0.039 J in the system. The frequency of oscillation was calculated to be approximately 0.91 Hz, and the acceleration at +10 cm from equilibrium was found to be -3.27 m/s², indicating the mass is slowing down as it approaches equilibrium. The user is seeking assistance with the equation of motion for the mass and the period of an external force for resonance. The conversation highlights the complexities of applying principles of simple harmonic motion to solve the problem.
usmcredhawk
Messages
4
Reaction score
0
So.. I have an ideal linear spring that streches 20 cm when a 40g mass is hung from it. The spring is then mounted horizontally on a frictionless surface (screams conservation of energy/momentum) and a 60g mass is attached to it. The 60g mass is then displaced 20cm from equilibrum and released.

Find the following:
1. frequency of oscillation
2. equation of motion for the mass
3. the speed and acceleration of the mass at +10 cm from equilibrium.
4. What would be the period of an external force that would drive the system at resonance and explain how I know this period is correct.

So this is what I've chiseled at so far:

I found the spring constant using hooke's law and got 1.96 N/m for k.

Then I know that because its a spring it will obey Kfinal +Uspringfinal = Kinitial +Uspringinitial

So pulling it means .5(1.96N/m)(.2m)^2 = .039 J of potential energy in the system. And since there won't be any other outside forces acting, the total energy for this system is going to be .039 J.

The problem is, all I feel like I can get out of the problem is the basic puzzle pieces and I don't know how to put it all together. I'm trying to look things up on simple harmonic motion its just not clicking for me.

Any leads/help?
 
Physics news on Phys.org
I thought about finding the speed and acceleration at +10 cm.

At this point Kinetic + Potential Spring energy has to be equal to .039 J. So I can do .5mv^2 +.5kx^2, plugging in the mass, spring constant, and distance to find the velocity of the mass which for kinetic and potential to equal .039 J would have to be .986 m/s.
 
so I found the frequency using T = 2pi*sqrt(m/k), then 1/T. So my frequency came out to being .91 Hz.

I'm still working on the equation of motion for the mass, the acceleration at +10 cm from equilibrium, and the period of an external force that would drive the system at resonance.

Any help/leads?
 
Haha well so I'm still plugging away.

Using hookes law of f = -kx, I can then look at f = ma and then have ma = -kx, rearranging it to get a = -kx/m, plugging things into get an acceleration of -3.27 m/s^2. The negative sign makes sense because since it is past equilibrium but not at the max amplitude yet so its slowing down as it reaches it.

Now I'm just stuck on the junk of the equation of motion of the mass and the period of the external force to get that bad boy into resonance.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'
Figure 1 Overall Structure Diagram Figure 2: Top view of the piston when it is cylindrical A circular opening is created at a height of 5 meters above the water surface. Inside this opening is a sleeve-type piston with a cross-sectional area of 1 square meter. The piston is pulled to the right at a constant speed. The pulling force is(Figure 2): F = ρshg = 1000 × 1 × 5 × 10 = 50,000 N. Figure 3: Modifying the structure to incorporate a fixed internal piston When I modify the piston...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top