Friction/Movement of Blocks down inclined plane

AI Thread Summary
The discussion centers on analyzing the movement of three boxes on a 15-degree inclined plane, each weighing 4 kg, with varying coefficients of friction. Box A remains stationary due to its static friction being greater than the force acting on it, while Box C, identical to A, also does not move. Box B, however, has a lower static friction coefficient and would move if not for the contact forces from A and C. The normal forces between the boxes need to be considered to determine if A and B will move together or separately. Understanding these interactions is crucial for solving the problem effectively.
ehunger1
Messages
2
Reaction score
0

Homework Statement


The given diagram is an inclined plane with a 15 degree angle. There are three boxes, A, B, and C all weighing 4 kg. The three packages are touching, but B is in the middle and larger than A and C, which are the same size.
The coefficients of friction for A and C are static=.30 and kinetic=.20
The coefficients of friction for B are static=.10 and kinetic=.08

Determine which, if any, of the packages will move and the friction force acting on each box.

Homework Equations


SUM Fx=0
SUM Fy=0


The Attempt at a Solution


I've determined the weight of each box is 39.2 N (F=ma)
For box A (closest to the angle of the inclined plane)
tan(15)=.268 < .3=static coefficient, therefore, block A will not move on its own
SUM Fx=f1-39.2sin(15)=0
SUM Fy=N1-39.2cos(15)=0
f1=friction force=10.15 N
N1=Normal Force from plane=37.9N

I don't know how to treat the blocks being in contact with each other. I know there should be a normal force there, and I know that for block B, tan(.15)=.268>.1, therefore on its own, block B would move. Block C will not move because it is identical to block A and there is no force acting on it to push it down the ramp.

How do I know if block A and B move?
 
Physics news on Phys.org
Help? Someone?
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Back
Top