Get Emergency Help on 4 Stuck Physics Problems | Mass, Force, Orbit Calculations

  • Thread starter Thread starter AllAmericanGirl2004
  • Start date Start date
AI Thread Summary
The discussion revolves around seeking help with four physics problems involving gravitational forces, orbital mechanics, and contact forces. The first problem requires calculating the gravitational force on one sphere from three others positioned at the corners of a square. The second problem involves estimating the mass of the Milky Way Galaxy based on the Sun's rotation and applying Kepler's laws. The third problem pertains to determining the orbital period of a hypothetical planet based on its distance from the Sun, while the fourth problem focuses on calculating the contact force between two blocks on a frictionless table under applied force. Participants provide guidance on formulas and methods to approach each problem effectively.
AllAmericanGirl2004
Messages
9
Reaction score
0
Help on some problems:EMERGENCY!

Hi all,

I only have 4 problems I'm stuck on. Maybe you can help me a little...please?! I know it seems like a lot of problems, but I've really tried to do these and I'm majorly stuck. If you guys'll help with these last 4, I won't ever have this many again, so just this time, you could possibly help me.

Okay...

1) Four 5.0kg spheres are located at the corners of a square of side .60 meters. Calculate the magnitude and direction of the gravitational force on one sphere due to the other three.

2) The Sun rotates about the center of the Milky Way Glaxay at a distance of about 30000 light years from the center (1 ly=9.5 x 10^15 m) if it takes about 200 million years to make one totation, estimate the mass of our Galaxy. Assume that the mass distribution of our galaxy is conventrated most in a central uniform sphere. If all the stars had about the mass of our Sun (2 x 10^30kg) how many stars would be in our galaxy?

3) The asteriod belt between Mars and Jupiter consists of many fragments. Which some scientists think came from a planet that once orbited the sun and then was distroyed. If the center of mass of the asteriod belt is about 3 time farther from the Sun that the Earth is , how long would it have taken this supposed planet to orbit the sun?

4) Two blocks are in contact on a frictionless table. A horizontal force is applied to one block. If m1=2.3kg, m2=1.2kg and F=3.2 N, find the force of contact between the 2 blocks, then show that if the smae force F is applied to m2 rather than m1 the force of contact between the blocks is 2.1 N.

Again, if you guys will help me, I will be ETERNALLY grateful! Please help!
 
Last edited:
Physics news on Phys.org
Hmm..
1. We choose one of the spheres. You decide to mark its location as the origin. This means we have 1 sphere on the x-axis .6 m from it, another on the y-axis, and a third one right between them, .6*sqrt(2) m from it. Use the formula F=G\frac{M_{1}M_{2}}{r^{2}} and calculate the sum of the forces.

2. Do you know the formula for the speed of a satellite (in this case, the Sun) ? If so use it. If you don't: remember the Sun is in rotary motion, and that v=S/t.

3. Kepler's third law should be used here.

4. I'm sorry, I didn't quite understand this...

Hope this helps!
 
For the fourth question
First Part (F applied on m1)
the contact force means
the force exerted by the block m2 on m1.
actually this force arises due to acceleration by applying the force.

First of all calculate the acc. of the system(divide F by total mass)

now contact force will be the force exerted by m2 opposing your F.
this force will be nothing but m2 * Acc.

Second Part (F applied on m2)

now m1 will oppose the motion.
the contact force will be m1 * acc.

( The acc. does not change when you apply F on the other block)

Try it out and let me know
 

Attachments

Thanks to you all! you've officially saved my life!
 
AllAmericanGirl2004 said:
Hi all,

I only have 4 problems I'm stuck on. Maybe you can help me a little...please?! I know it seems like a lot of problems, but I've really tried to do these and I'm majorly stuck. If you guys'll help with these last 4, I won't ever have this many again, so just this time, you could possibly help me.

Okay...

1) Four 5.0kg spheres are located at the corners of a square of side .60 meters. Calculate the magnitude and direction of the gravitational force on one sphere due to the other three.

2) The Sun rotates about the center of the Milky Way Glaxay at a distance of about 30000 light years from the center (1 ly=9.5 x 10^15 m) if it takes about 200 million years to make one totation, estimate the mass of our Galaxy. Assume that the mass distribution of our galaxy is conventrated most in a central uniform sphere. If all the stars had about the mass of our Sun (2 x 10^30kg) how many stars would be in our galaxy?

3) The asteriod belt between Mars and Jupiter consists of many fragments. Which some scientists think came from a planet that once orbited the sun and then was distroyed. If the center of mass of the asteriod belt is about 3 time farther from the Sun that the Earth is , how long would it have taken this supposed planet to orbit the sun?

4) Two blocks are in contact on a frictionless table. A horizontal force is applied to one block. If m1=2.3kg, m2=1.2kg and F=3.2 N, find the force of contact between the 2 blocks, then show that if the smae force F is applied to m2 rather than m1 the force of contact between the blocks is 2.1 N.

Again, if you guys will help me, I will be ETERNALLY grateful! Please help!
1)
I'd suggest drawing a diagram here.
1--2
| \ |
3--4
I'll choose mass 1.
<br /> \begin{align*}<br /> \Sigma F_y &amp; = -\frac{Gm_1m_3}{r_{13}^2} - \frac{Gm_1m_4}{r_{14}^2}\frac{\sqrt{2}}{2} \\<br /> \Sigma F_x &amp; = \frac{Gm_1m_2}{r_{12}^2} + \frac{Gm_1m_4}{r_{14}^2}\frac{\sqrt{2}}{2} \\<br /> \intertext{Add the horizontal and vertical forces vectorially}<br /> \Sigma F^2 &amp; = \Sigma F_x^2 + \Sigma F_y^2<br /> \end{align*}<br />
Take the square root of both sides and substitute the values from the question. Note that r_{14} = r_{13}\sqrt{2}.

2)

To find the mass of the galaxy, I'd use Kepler's third law in the form \frac{r^3}{T^2}= \frac{GM}{4\pi^2} and solve for M. Divide M by 2 x 10^30kg to find an approximation for the number of stars.

3)

Whoa, that's a really badly worded question. However, if by centre of mass they mean the distance from the midpoint of the annular radius to the sun. Then you just apply Kepler's third for the planet and the earth. The value of \frac{GM}{4\pi^2} is the same for both planets as they both orbit around the sun, so you end up with an expression like \frac{r_1^3}{T_1^2} = \frac{r_1^3}{T_1^2}. Since you know three of the four variables in the equation you can find the fourth.

4)
Just solve this with Newton's second law. I'm assuming m1 is to the left of m2 and taking right as the positive direction.
For m1
<br /> \begin{align*}<br /> \Sigma F &amp; = m_1a \\<br /> F - n &amp; = m_1a \\<br /> \intertext{where n is the contact force}<br /> n &amp; = F - m_1a<br /> \intertext{The only horizontal force m2 experiences is the equal and opposite reaction force to the contact force. The blocks are in contact so that they both accelerate at the same rate a,}<br /> \Sigma F &amp; = m_2 a \\<br /> n &amp; = m_2 a \\<br /> a &amp; = \frac{n}{m_2}<br /> \end{align*}<br />
so
<br /> \begin{align*}<br /> n &amp; = F - \frac{m_1n}{m_2} \\<br /> n\left(1 + \frac{m_1}{m_2}\right) &amp; = F \\<br /> n &amp; = \frac{F}{1 + \frac{m_1}{m_2}}<br /> \end{align*}<br />
Now rework the problem with
<br /> \begin{align*}<br /> n - F &amp; = -m_2a \\<br /> \intertext{and}<br /> -n &amp; = -m_1a \\<br /> a &amp; = \frac{n}{m_1} \\<br /> n &amp; = F - \frac{m_2n}{m_1} \\<br /> n &amp; = \frac{F}{1+ \frac{m_2}{m_1}} <br /> \end{align*}<br />
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Collision of a bullet on a rod-string system: query'
In this question, I have a question. I am NOT trying to solve it, but it is just a conceptual question. Consider the point on the rod, which connects the string and the rod. My question: just before and after the collision, is ANGULAR momentum CONSERVED about this point? Lets call the point which connects the string and rod as P. Why am I asking this? : it is clear from the scenario that the point of concern, which connects the string and the rod, moves in a circular path due to the string...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top