Hang-glider and water balloon problem

  • Thread starter Thread starter Karajovic
  • Start date Start date
  • Tags Tags
    Balloon Water
AI Thread Summary
A hang-glider drops a water balloon from 680.0 m at a 57.0° angle with the vertical, and the balloon hits the ground after 5.20 seconds. The initial velocity of the hang-glider is calculated to be 186 m/s, but the textbook states it should be 193 m/s, raising questions about the calculations. The discussion revolves around the correct use of trigonometric functions, specifically whether to use sine or cosine based on the angle's reference point. Clarification is provided that when the angle is given with respect to the vertical, cosine should be used for horizontal components, while sine applies to vertical components. Understanding the relationship between the angle and the direction of force is crucial for solving such physics problems accurately.
Karajovic
Messages
16
Reaction score
0

Homework Statement



A hang-glider, diving at an angle of 57.0o with the vertical, drops a water balloon at an altitude of 680.0 m. The water balloon hits the ground 5.20 s after being released.
a. What was the velocity of the hang-glider?

Homework Equations




The Attempt at a Solution



we know that the initial speed of the water balloon is the speed of the hang-glider... so:
∆y = vi(∆t)sinx - 1/2g∆t^2
680 = vi(5.2)sin57 - 1/2(-9.81)(5.2)^2
vi = 186 m/s

but my textbook says the answer is 193 m/s.

Is the book wrong? or am I wrong?

thanks!
 
Physics news on Phys.org
Hi Karajovic! :smile:
Karajovic said:
A hang-glider, diving at an angle of 57.0o with the vertical

so is it sin or cos? :wink:

(btw, are you ok on the other thread?)
 
Hey tiny-tim!

Thanks so much! I've been trying to find a solution for a while now! But may you please explain why you use cos?

Thanks again! (and I thought I replied to the other thread, but I guess it didn't send, I'll post there now!
 
Hey Karajovic! :smile:
Karajovic said:
But may you please explain why you use cos?

You're probably used to being given the angle from the horizontal, in which case of course the horizontal component is cos, and the vertical component (which you need here) is sin.

The general rule is that it's always cos of the angle between the force and the direction.

So just ask yourself, is the given angle, θ, the angle between the force and the direction, or is it (90º - θ)?

Either way, it's cos … cosθ, or cos(90° - θ). :wink:
 
tiny-tim said:
Hey Karajovic! :smile:You're probably used to being given the angle from the horizontal, in which case of course the horizontal component is cos, and the vertical component (which you need here) is sin.

The general rule is that it's always cos of the angle between the force and the direction.

So just ask yourself, is the given angle, θ, the angle between the force and the direction, or is it (90º - θ)?

Either way, it's cos … cosθ, or cos(90° - θ). :wink:

Argh... I don't get it... So, if you are given an angle with the horizontal, you use sin (but you said this is the vertical?) and if you are with the vertical, you use cos (which you said is the horizontal?)

What do you mean by the angle between the force and the direction?

(I put an attachment of a drawing... If angle B is 57, BC is 680 m and A is the direction of the hang-glider, which is the force? it can't be BC?)

Sorry if I may have created some confusion..

Thanks again!
 

Attachments

  • Untitled.png
    Untitled.png
    1.1 KB · Views: 471
Karajovic said:
What do you mean by the angle between the force and the direction?

I mean if you're asked for the component of a force in a direction,

it's always cos of the angle between that force and that direction.

Sometimes they give you the wrong angle (usually 90° minus the angle) …

then it's cos of the correct angle, which is sin of the angle they gave you. :smile:
 
tiny-tim said:
I mean if you're asked for the component of a force in a direction,

it's always cos of the angle between that force and that direction.

Sometimes they give you the wrong angle (usually 90° minus the angle) …

then it's cos of the correct angle, which is sin of the angle they gave you. :smile:

Oh! I apologize, yes, know I understand! You can still use sin, but since the angle is with the vertical you would subtract it by 90 to get your horizontal angle..

so sin(90-x) = cosx (x is with the vertical) ?

Thank you! :smile:
 

Similar threads

Back
Top