Help with Physics Problem: 1.2 Tonne Car Acceleration

  • Thread starter Thread starter Kain
  • Start date Start date
  • Tags Tags
    Physics
AI Thread Summary
To determine the unbalanced force exerted by the wheels on the ground for a 1.2 tonne car accelerating at 1 m/s², the calculation involves using Newton's second law, F=ma. The mass of the car is 1.2 tonnes, which converts to 1200 kg. Multiplying the mass by the acceleration gives a force of 1200 N. According to Newton's third law, the force exerted by the wheels on the ground is equal in magnitude and opposite in direction to the force exerted by the ground on the wheels. Thus, the unbalanced force is 1200 N.
Kain
Messages
1
Reaction score
0
considering i am not 2 smart at these things i really need help. it's probably the easiest problem out there, but like i said, I'm a dumbass. here it is

A 1.2 tonne car (a laser) is accelerated from the lights at 1m/sec/sec. What unbalanced force do the wheels exert on the ground??

I thought it might be 1.2 x 10^3 but I am not sure

Thanks
 
Physics news on Phys.org
F=ma

so the force on the car to make it accelerate is (1.2 x 10^3) x 1 = 1.2 x 10^3 N.

This force is applied by the ground to the wheels. There is an equal and opposite reaction force due to the wheels pushing on the ground, according to Newton's third law
 
Kain,
you are smart enough :smile: :smile:
 
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Back
Top