Help with Physics Problems: Elevator Acceleration & Gravity

  • Thread starter Thread starter chipsdeluxe
  • Start date Start date
  • Tags Tags
    Physics
AI Thread Summary
The discussion focuses on solving two physics problems involving an elevator and satellite gravity. For the elevator scenario, the total force acting on the woman is calculated using F=ma, considering her mass and the elevator's acceleration to determine the scale reading. The second problem involves calculating the acceleration due to gravity at the altitude of synchronous satellites using the formula F=GmM/r², where the radius is the sum of Earth's radius and the satellite's height. Participants emphasize the importance of understanding force and acceleration relationships in both scenarios. Mastery of these concepts is crucial for solving similar physics problems effectively.
chipsdeluxe
Messages
10
Reaction score
0
i suck at physics!

can someone please help me with some physics problems?

1. A woman stands on a scale in a moving elevator. Her mass is 62.2 kg, and the combined mass of the elevator and scale is an additional 836 kg. Starting from rest, the elevator accelerates upward. During the acceleration, the hoisting cable applies a force of 9110 N. What does the scale read during the acceleration?

2. Synchronous communications satellites are placed in a circular orbit that is 2.32 x 107 m above the surface of the earth. What is the magnitude of the acceleration due to gravity at this distance?

i don't even know where to start. any help would be great
 
Physics news on Phys.org
Force equals mass times acceleration. What would the scale read if the woman were standing on it while it was not accelerating?

You know the mass of the woman, scale, and elevator. Use F= ma to find the acceleration of all of them. Now use F= ma with just the mass of the woman to find what force would give that acceleration to her alone. Add that force to here weight.

F= GmM/r2. Add the radius of the Earth to the height above the Earth to find r, the satellites distance from the earth. You will have to look up G ("universal gravity constant") and M (the Earth's mass). Since acceleration is a= F/m, the "m"s cancel and you don't need to use the satelite's mass.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'
Figure 1 Overall Structure Diagram Figure 2: Top view of the piston when it is cylindrical A circular opening is created at a height of 5 meters above the water surface. Inside this opening is a sleeve-type piston with a cross-sectional area of 1 square meter. The piston is pulled to the right at a constant speed. The pulling force is(Figure 2): F = ρshg = 1000 × 1 × 5 × 10 = 50,000 N. Figure 3: Modifying the structure to incorporate a fixed internal piston When I modify the piston...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top