Help with Potential Energy Curve question

AI Thread Summary
The discussion revolves around a problem involving a conservative force acting on a particle, with a focus on analyzing its potential energy curve. Participants clarify that the derivative of the potential energy graph represents the force acting on the particle, which aids in determining its magnitude and direction. The limits of motion for the particle are identified as the points where it oscillates, linked to the potential energy well concept. Calculating the particle's energy and understanding its behavior in the potential well are emphasized as key steps in solving the problem. Overall, the conversation highlights the importance of interpreting the graph and applying relevant physics equations to find the answers.
Caps1394
Messages
6
Reaction score
0

Homework Statement


A conservative force F(x) acts on a 3.0 kg particle that moves along the x axis. The potential energy U(x) associated with F(x) is graphed in Figure 8-60. When the particle is at x = 3.0 m, its velocity is -1.0 m/s. The "kinks" in the graph occur at (1, -2.8), (4, -17.2), and (8.5, -17.2); and the endpoint is at (15, -2).
08_49.gif

(a) What are the magnitude and direction of F(x) at this position?
Magnitude
(b) Between what limits of x does the particle move?
Lower limit and and upper limit
(c) What is its speed at x = 7.0 m?

Homework Equations


Ke=1/2MV2


The Attempt at a Solution


I'm not even sure how to start this problem
 
Physics news on Phys.org
What does the derivative or slope on the graph represent? That should give you a good start!
 
That was easy enough!

But about the limits. Would the lower and upper limits be the points where the particle oscillates between?
 
Caps1394 said:
That was easy enough!

But about the limits. Would the lower and upper limits be the points where the particle oscillates between?
Apparently, you've answered this question to yourself. It will be hard to help you if you don't respond with the answer and why or how you came up with that answer.
 
"Would the lower and upper limits be the points where the particle oscillates between?"

Yes. This part is a bit complicated but your use of "oscillates" indicates you know what is going on. Kind of like an atom in the potential well of a molecule. Just a matter of calculating the energy it has and using the graph, I think.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'
Figure 1 Overall Structure Diagram Figure 2: Top view of the piston when it is cylindrical A circular opening is created at a height of 5 meters above the water surface. Inside this opening is a sleeve-type piston with a cross-sectional area of 1 square meter. The piston is pulled to the right at a constant speed. The pulling force is(Figure 2): F = ρshg = 1000 × 1 × 5 × 10 = 50,000 N. Figure 3: Modifying the structure to incorporate a fixed internal piston When I modify the piston...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top