How are dimensions of differential determined by engine power and torque?

racool
Messages
6
Reaction score
0
how dimensions of differential are made with respect to engine power and torque
 
Engineering news on Phys.org
racool said:
how dimensions of differential are made with respect to engine power and torque
What sort of dimensions?
 
A differential is fundamentally a gear train, and its design would be similar to any other gear system's design.
 

Thread 'Race car suspension Class'

Posted June 2024 - 15 years after starting this class. I have learned a whole lot. To get to the short course on making your stock car, late model, hobby stock E-mod handle, look at the index below. Read all posts on Roll Center, Jacking effect and Why does car drive straight to the wall when I gas it? Also read You really have two race cars. This will cover 90% of problems you have. Simply put, the car pushes going in and is loose coming out. You do not have enuff downforce on the right...
View full post »

Thread 'Cantilever help'

I'm trying to decide what size and type of galvanized steel I need for 2 cantilever extensions. The cantilever is 5 ft. The space between the two cantilever arms is a 17 ft Gap the center 7 ft of the 17 ft Gap we'll need to Bear approximately 17,000 lb spread evenly from the front of the cantilever to the back of the cantilever over 5 ft. I will put support beams across these cantilever arms to support the load evenly
View full post »
Thread 'Physics of Stretch: What pressure does a band apply on a cylinder?'

Thread 'Physics of Stretch: What pressure does a band apply on a cylinder?'

Scenario 1 (figure 1) A continuous loop of elastic material is stretched around two metal bars. The top bar is attached to a load cell that reads force. The lower bar can be moved downwards to stretch the elastic material. The lower bar is moved downwards until the two bars are 1190mm apart, stretching the elastic material. The bars are 5mm thick, so the total internal loop length is 1200mm (1190mm + 5mm + 5mm). At this level of stretch, the load cell reads 45N tensile force. Key numbers...
View full post »

Similar threads

Specified Torque Specs on Automotive Fasteners -- Required or just suggestions?
Replies
13
Views
4K
How to choose the right power screw dimensions given the maximum load
Replies
5
Views
1K
Automotive How to plot a power and torque graph for an engine?
Replies
18
Views
6K
Generator start-up torque
Replies
2
Views
2K
Why are gas turbine engines not used in cars? Is what I think correct?
Replies
19
Views
2K
Dual-Axis Solar Tracker Torque requirements
Replies
6
Views
2K
Understanding the Power of an Engine
Replies
16
Views
3K
Is engine torque a static force?
Replies
10
Views
3K
Plotting a Power Graph using Torque & RPM
Replies
3
Views
4K
How much should I adjust torque when using anti-seize?
Replies
22
Views
5K

Hot Threads

Recent Insights

Back
Top