How can I successfully precipitate gold from ore using aqua regia?

  • Thread starter Thread starter happyprince
  • Start date Start date
  • Tags Tags
    Gold
AI Thread Summary
The discussion centers on the challenges of precipitating gold from ore dissolved in aqua regia using sodium metabisulfite. The original poster successfully precipitates pure gold but encounters issues when dealing with gold extracted from ore. Potential reasons for this difficulty include the presence of other metals or impurities in the ore, such as pyrite or similar minerals, which can dissolve in aqua regia and interfere with the precipitation process. It is suggested that the gold may not be in its pure form, and the presence of compounds like telluride could complicate the extraction. Additionally, the discussion mentions the importance of using an appropriate extracting solvent with a high partition coefficient for gold, which does not react irreversibly with it and does not mix with aqua regia. The conversation highlights the need for clarity on the type of gold ore being processed to better understand the precipitation issues.
happyprince
Messages
1
Reaction score
0
Hi,
I can precipitate gold dissolved in aqua regia if the gold is just pure.I use sodium metabisulfite.However,if I dissolve the gold from ore in aqua regia,I cannot precipitate the gold.What's wrong?Might other metals or mud in the soil spoil it?Does anything prevent precipitating?Any help will be highly appreciated.Thanks a lot in advance.
 
Chemistry news on Phys.org
Try liquid-liquid extraction. You need an extracting solvent that has a high partition coefficient with gold (low partition coefficient with all others), but also doesn't irreversibly react with gold. The extracting solvent also can't mix with aqua regia. Hope this helped.
 
Last edited:
happyprince said:
Hi,
I can precipitate gold dissolved in aqua regia if the gold is just pure.I use sodium metabisulfite.However,if I dissolve the gold from ore in aqua regia,I cannot precipitate the gold.What's wrong?Might other metals or mud in the soil spoil it?Does anything prevent precipitating?Any help will be highly appreciated.Thanks a lot in advance.

What are you meaning by gold ore? Usually "ore" means a crude compound of the metal you are seeking. Are you simply talking about soil or crushed rock with a decent content of elemental gold? Or are you in a region where the gold is obtained as telluride? (the only gold compound that is present in nature at a significant level).

I do not know much about the chemistry of telluride, and cannot help you further if that is the case.

If you are simply talking native elemental gold, then I think the most likely explanation is that most of the "gold" in your material is pyrite or similar material (marcasite, arsenopyrite, chalcopyrite) which occurs in conjunction with gold deposits, which can have very similar appearance to native gold, and which can make gold-bearing rock look much richer than it really is. These materials also dissolve in aqua regia, but do not precipitate anything when treated with bisulfite. However, there is one tell-tale sign -- a smell of rotten egg gas when you first apply the aqua regia.
 
I was introduced to the Octet Rule recently and make me wonder, why does 8 valence electrons or a full p orbital always make an element inert? What is so special with a full p orbital? Like take Calcium for an example, its outer orbital is filled but its only the s orbital thats filled so its still reactive not so much as the Alkaline metals but still pretty reactive. Can someone explain it to me? Thanks!!
It seems like a simple enough question: what is the solubility of epsom salt in water at 20°C? A graph or table showing how it varies with temperature would be a bonus. But upon searching the internet I have been unable to determine this with confidence. Wikipedia gives the value of 113g/100ml. But other sources disagree and I can't find a definitive source for the information. I even asked chatgpt but it couldn't be sure either. I thought, naively, that this would be easy to look up without...
Back
Top