How Do Deformation Mechanism Maps Connect Mechanics and Materials Science?

Astronuc
Staff Emeritus
Science Advisor
Gold Member
Messages
22,340
Reaction score
7,138
This material forms a bridge between mechanics and materials science.

MIT Open Course - http://ocw.mit.edu/OcwWeb/Materials-Science-and-Engineering/3-11Mechanics-of-MaterialsFall1999/Modules/index.htm

This is a fairly general course.


A more specialized area - DEFORMATION-MECHANISM MAPS
The Plasticity and Creep of Metals and Ceramics
 
Last edited by a moderator:
Engineering news on Phys.org
Thanx man..
 

Thread 'Race car suspension Class'

Posted June 2024 - 15 years after starting this class. I have learned a whole lot. To get to the short course on making your stock car, late model, hobby stock E-mod handle, look at the index below. Read all posts on Roll Center, Jacking effect and Why does car drive straight to the wall when I gas it? Also read You really have two race cars. This will cover 90% of problems you have. Simply put, the car pushes going in and is loose coming out. You do not have enuff downforce on the right...
View full post »

Thread 'Cantilever help'

I'm trying to decide what size and type of galvanized steel I need for 2 cantilever extensions. The cantilever is 5 ft. The space between the two cantilever arms is a 17 ft Gap the center 7 ft of the 17 ft Gap we'll need to Bear approximately 17,000 lb spread evenly from the front of the cantilever to the back of the cantilever over 5 ft. I will put support beams across these cantilever arms to support the load evenly
View full post »
Thread 'What's the most likely cause for this carbon seal crack?'

Thread 'What's the most likely cause for this carbon seal crack?'

We have a molded carbon graphite seal that is used in an inline axial piston, variable displacement hydraulic pump. One of our customers reported that, when using the “A” parts in the past, they only needed to replace them due to normal wear. However, after switching to our parts, the replacement cycle seems to be much shorter due to “broken” or “cracked” failures. This issue was identified after hydraulic fluid leakage was observed. According to their records, the same problem has occurred...
View full post »

Similar threads

High Temperature and Very High Temperature Materials
Replies
7
Views
3K
Atomic displacements, replacements, and radiation damage of structural materials
Replies
1
Views
642
How does a viscoelastic brake mechanism work for satellite deployment systems?
Replies
9
Views
3K
How Do Optics and Meta-Materials Influence Metal Deformation in Blacksmithing?
Replies
2
Views
471
Deformation-Mechanism Maps; Creep
Replies
2
Views
7K
Engineering Trouble with choosing how to shape my engineering career
Replies
9
Views
1K
  • Poll Poll
Mechanical Metallurgy by George Dieter
Replies
1
Views
3K
Admissions Can someone critique my statement of purpose? (Master's Degree in Quantum Engineering)
Replies
8
Views
4K
Quantum Workforce Elements, Toolbox for QIS Programs at Universities
Replies
1
Views
2K
Epothilone B study connected to 'Hard Problem of Consciousness' Model
Replies
5
Views
2K

Hot Threads

Recent Insights

Back
Top