How do I accurately measure the size of an object using CCTV lenses?

  • Thread starter Thread starter bobjim
  • Start date Start date
  • Tags Tags
    Lenses
AI Thread Summary
Understanding CCTV lenses involves recognizing that nodal points align with principle planes in air due to a constant refractive index. The focal length of a 12mm CCTV lens is typically measured from the mounting surface, not the last lens element. Accurately measuring an object's size from its pixel dimensions in an image requires a clear understanding of lens optics. The discussion indicates a learning process, with the original poster expressing confidence in their conclusions. The thread concludes with a suggestion for closure, indicating resolution of the initial query.
bobjim
Messages
2
Reaction score
0
[SOLVED] Understanding CCTV lenses

Hey guys, I'm trying to get my head around the way a lens works...

I've found the nodal points, and since the medium surrounding the lens is air constant refractive index (air) then they nodal points coincide with the principle planes, right?

Also the Focal length of the lens is 12mm, which I assume since it's a CCTV lens, is measured from the mounting surface rather than the last element of the lens... is that a fair assumption?

I've drawn a diagram of what I think represents the path of a ray going through the lens. (see attached) What I'm trying to do is accurately measure the size of something from it's size in pixels in the image.
 

Attachments

  • Lens Principle Planes.png
    Lens Principle Planes.png
    7.3 KB · Views: 499
Science news on Phys.org
damn, I talk some rubbish sometimes! *think* I've figured it all out now... ignore everything above! If an admin want's to close/delete this thread, please feel free.
 
Thread 'Simple math model for a Particle Image Velocimetry system'

Thread 'Simple math model for a Particle Image Velocimetry system'

Hello togehter, I am new to this forum and hope this post followed all the guidelines here (I tried to summarized my issue as clean as possible, two pictures are attached). I would appreciate every help: I am doing research on a Particle Image Velocimetry (PIV) system. For this I want to set a simple math model for the system. I hope you can help me out. Regarding this I have 2 main Questions. 1. I am trying to find a math model which is describing what is happening in a simple Particle...
View full post »
Thread 'How to model converging illumination through object plane (in ZEMAX)'

Thread 'How to model converging illumination through object plane (in ZEMAX)'

Hello community, I'm designing a projection lens system for a 35mm film projector in Zemax OpticStudio and struggling with the correct sequential mode setup for the illumination geometry. The light source is a Xenon short-arc lamp reflected by an ellipsoid mirror, which creates a converging cone with a 40.6 degree full angle that passes through the film gate. The film gate is my object plane, but the light doesn't diverge from it like a typical Lambertian source. Instead, the converging...
View full post »

Similar threads

I Focusing UV light from a 275nm LED down to a small spot
Replies
10
Views
3K
I How Can I Build an Effective DIY Helmet-Mounted HUD?
Replies
19
Views
4K
I Prism Spectrometer Objective: Optics Question
Replies
9
Views
3K
What is the relationship between numerical aperture and resolution in lenses?
Replies
1
Views
2K
Ray diagrams, lenses and microscopes
Replies
2
Views
3K
Invisibility cloaking using 4 lenses
Replies
8
Views
2K
From what point is the focal length of a thick lens measured?
Replies
7
Views
5K
Inserting thick lenses into a thin lens system and deducing values
Replies
1
Views
2K
Thin lens approximation and Apparent depth
Replies
20
Views
4K
OPTICS: How to solve a two lens system with the object in a medium?
Replies
1
Views
2K

Hot Threads

Recent Insights

Back
Top