How do nonconservative forces affect work done in a round trip?

AI Thread Summary
The discussion revolves around calculating the work done by a resistive force during a round trip on a bicycle. The bicyclist rides 5.0 km east and then returns 5.0 km west, with a resistive force of 3.0 N acting in opposite directions on each leg of the trip. The initial calculation mistakenly used kilometers instead of meters, leading to an incorrect answer of -30 J instead of the correct -30000 J. The key takeaway is that work is calculated in Joules, which requires distances to be in meters. The confusion highlights the importance of using the correct units in physics calculations.
me_me
Messages
2
Reaction score
0
Hi!

I've been needing help with a question in my textbook. It seems so stupidly easy, but I can't get it. (Ironically enough, I understood all the others).. here's the question:

A bicyclist rides 5.0km due east, while the resistive foce from the air has a magnitude of 3.0N and points due west. The rider then turns around and rides 5.0km due west, back to her starting point. The resistive force from the air on the return trip has a magnitude of 3.0 N and points due east. Find the work done by the resisitve force during the round trip.

Here's what I did:
W = Fd
W = (3.0N)(5.0km) = -15J
since its a round trip, I doubled it and get -30J, but the book says that the answer is -30000J

Any help would be greatly appreciated!
 
Physics news on Phys.org
You have a "units" problem. A "Joule" is defined as the work done by a force of 1 Newton acting over a distance of 1 meter- not 1 kilometer.

How much work is done by a force of 3 N acting over a (total) distance of 1000 m?
 
oh.. a UNITS problem.. I feel very stupid.. sorry for bothering you with that, but thanks! :)
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Trying to understand the logic behind adding vectors with an angle between them'
My initial calculation was to subtract V1 from V2 to show that from the perspective of the second aircraft the first one is -300km/h. So i checked with ChatGPT and it said I cant just subtract them because I have an angle between them. So I dont understand the reasoning of it. Like why should a velocity be dependent on an angle? I was thinking about how it would look like if the planes where parallel to each other, and then how it look like if one is turning away and I dont see it. Since...
Back
Top