How Do You Calculate Load Weight for Balanced Normal Forces in a Truck?

  • Thread starter Thread starter Northbysouth
  • Start date Start date
  • Tags Tags
    Load Truck Weight
AI Thread Summary
To calculate the load weight (WL) for balanced normal forces in a truck, the moment and force equations are essential. Initially, the moment about point B was incorrectly calculated using the truck's weight as 3600 lb instead of the correct 3160 lb. After correcting this error, the equations were adjusted, leading to the correct normal force (N) and ultimately the accurate load weight. The final calculation determined that WL should be approximately 415.789 lb for the forces under the front and rear wheels to be equal. This highlights the importance of using accurate values in physics calculations.
Northbysouth
Messages
241
Reaction score
2

Homework Statement


The indicated location of the center of gravity of the 3160-lb pickup truck is for the unladen condition. If a load whose center of gravity is x = 21 in. behind the rear axle is added to the truck, determine the load weight WL for which the normal forces under the front and rear wheels are equal.

I have attached an image of the question.

Homework Equations


ƩM = 0
ƩF = 0


The Attempt at a Solution



Firstly, I found the moment about point B.

ƩMB = -N(110 in) + (3600 lb)(65 in) - (WL)(21 in)

Then I found the forces acting in the y-direction:

ƩFy = N + N -3600lb -WL

I then solved this equaiton (force equation) for N, giving me:

2N = 3600lb + WL
N = 1800lb + WL/2

I then plugged the value of N into the moment equation

ƩMB = -(1800lb + WL/2) + (3600lb)(65 in) - (WL)(21 in)

Solving for WL:

0 = -198000 lbft - 55 WL + 234000 lbft - 21WL
76WL = 36000 lbft

WL = 473.684 lb

But it says my answer is wrong. Even more annoying is that this online homework has an example question that is identical except for the numbers, and I ran through that doing the same calculations (with the numbers altered appropriately) and I got the same answer that they did.

Any suggestions or helpful hints would be appreciated. Thanks
 

Attachments

  • Truck load weight.png
    Truck load weight.png
    19 KB · Views: 2,588
Physics news on Phys.org
I went over my calculations and found my mistake. I confused the force of the truck (3160lb) with the example question they gave me in which the truck had a force of 3600lb. Thus my calculations are as follows:

ƩMB = 0
0 = -N(110 in) + (310lb)(65 in) - WL(21 in)

ƩFy = 0
ƩFy = N + N - 3160lb - WL
2N = 3160lb + WL
N = 1580lb + WL/2

ƩMB = -(1580lb + WL/2)(110 in) + 205400lb - 21WL
= -173800lb in - 55WL = 205400 lb in - 21WL

55WL + 21WL = 31600 lb in

Wl = 31600 lb in/ (55 + 21)

WL = 415.789 lb

This is the correct answer
 
Back
Top