How Do You Solve Complex Kirchhoff's Law Problems?

AI Thread Summary
The discussion revolves around solving complex Kirchhoff's Law problems, with a focus on finding the current through each resistor using provided equations. The user expresses difficulty in understanding how to mathematically derive the currents, despite having correct equations. Participants emphasize the importance of clearly presenting attempts and details for effective assistance, suggesting the use of LaTeX for clarity. An error in the user's equations is identified, highlighting the need for careful verification of calculations. Overall, the thread underscores the necessity of clear communication and detailed problem-solving steps in physics discussions.
BirdK
Messages
3
Reaction score
0

Homework Statement


http://file:///Users/jarrettwingfield1/Desktop/Screen%20Shot%202016-09-29%20at%205.29.21%20PM.png My professor told me my equations were correct, but I do not know how to find the current through each resistor mathematically, and every example I find online is too simple so it doesn't help me.
My equations are: i1=i2+i3; -2i2 - 6i1 = -8 ; 2i2- 4i3 = -12
An online calculator says i1=0.857 i2=-1.429 and i3= 2.286

Homework Equations

The Attempt at a Solution

question 4a.jpg
Screen Shot 2016-09-29 at 5.29.21 PM.png

I
question 4.jpg
[/B]
 
Last edited by a moderator:
Physics news on Phys.org
Hi BirdK, Welcome to Physics Forums.

Your image is not visible, likely because it's hosted on your machine. Can you upload it? (Use the UPLOAD icon at the bottom right of the reply edit window).

You need to show some details of your attempt.
 
Well I can't seem to figure out the upload thing, maybe because its a mac. But I am certain that my equations are set up correctly, so if someone can just show me how to do the math. I've attempted it several times, but my professor hasn't showed us how to do all the different types of these equations.
 
If the image is in a file on your computer then the UPLOAD mechanism should be able to open a file list via your machine's operating system for selection. If not then perhaps the mechanism is blocked on your machine (security issue?). Otherwise, you should be able to cut and paste a "snipped" screen grab. Failing that, upload your image to a hosting side and paste a URL.

Regarding your equations, helpers won't do the math for you or show you step by step. You need to show what you've attempted in detail and they will point out errors, make suggestions, give hints and so on.
 
I attached the problem and my work. Where it says 3(4), that just means I multiplied equation 3 by 4, to add to the equation of 1+2
 
I'm having difficulty interpreting your handwritten work, but I can see that the results you're getting are not correct.

I've spotted one error in the first block of equations where you summed ##-6 I_3## and ##-16 I_3## and arrived at ##-24 I_3##, which is not right. I gave up after that.

You should endeavor to make the math you present more clear for others to read, preferably with some commentary to describe what you're doing at each step. Ideally you'd type in your equations so that they can be quoted in replies. LaTeX is a wonderful thing :smile:
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Trying to understand the logic behind adding vectors with an angle between them'
My initial calculation was to subtract V1 from V2 to show that from the perspective of the second aircraft the first one is -300km/h. So i checked with ChatGPT and it said I cant just subtract them because I have an angle between them. So I dont understand the reasoning of it. Like why should a velocity be dependent on an angle? I was thinking about how it would look like if the planes where parallel to each other, and then how it look like if one is turning away and I dont see it. Since...
Back
Top