How Is Tension Distributed in a Multi-Block System?

  • Thread starter Thread starter physicsgrade11
  • Start date Start date
  • Tags Tags
    Confused Tension
AI Thread Summary
In a multi-block system where a girl pulls three blocks with a force of 6 N, the tension in the rope between the first and second blocks is calculated to be 5 N, while the tension between the second and third blocks is 2 N. The weights of the blocks were initially misstated as Newtons but are actually in kilograms. The discussion emphasizes the importance of understanding the relationship between force and mass in calculating tension. Participants express a willingness to share the steps for solving the problem if needed. Overall, the conversation revolves around clarifying the tension distribution in the system.
physicsgrade11
Messages
9
Reaction score
0
Ok - I was helping a friend out and was helping her with a problem but I am not sure if i was right.
A girl is pulling three blocks with a rope at a force of 6 N . There is two more strings between each block. The first block weighs 0.5 N the second block weighs 1.5N the third block weighs 1 N. Ignore friction. What is the amount of tension on each rope? :confused:
 
Physics news on Phys.org
Sorry i made a mistake the weight of the blocks are meant to be in kilograms not N .
lol idiot me...
 
The force on the rope between the first and second blocks is 5N
And the force on the rope between the second and third blocks is 2N.

I hope that helps
If you need the steps to get the answers, just ask.
 
physicsgrade11 said:
Sorry i made a mistake the weight of the blocks are meant to be in kilograms not N .
lol idiot me...
The unit of weight IS Newton, though..
 
Miracles said:
The force on the rope between the first and second blocks is 5N
And the force on the rope between the second and third blocks is 2N.

I hope that helps
If you need the steps to get the answers, just ask.

hey... how'd u do it?

thanks much
 

Thread 'Rolling without slipping on a curved surface'

Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
View full post »

Thread 'Struggling to understand the concept of this question (ice cube in water optics question)'

TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
View full post »

Similar threads

Force pulling on a string at an angle with a block at the other end
Replies
2
Views
1K
Why Does Calculating Tension in Multiple Blocks Require Different Forces?
Replies
2
Views
1K
Static Friction Required to Keep the System from Moving (Two Boxes)
Replies
16
Views
3K
Newton's law problem: Pushing 2 stacked blocks on a horizontal table
Replies
13
Views
3K
What is the maximum tension and friction force for a block held on an incline?
Replies
19
Views
4K
Tension in the wire connecting two blocks
Replies
5
Views
2K
Why is the tension force equal to friction force
Replies
9
Views
7K
Tension force of block and rope
Replies
25
Views
5K
What is the relationship between tension and mass in a system with friction?
Replies
6
Views
2K
The tension in the cord in this system
Replies
7
Views
2K

Hot Threads

Recent Insights

Back
Top