How Is Work Calculated When Pulling a Blimp with Drag and Angle Considerations?

  • Thread starter Thread starter hganser
  • Start date Start date
  • Tags Tags
    Work
AI Thread Summary
To calculate the work done in pulling a blimp at an angle of 52 degrees over 7 km, the primary focus is on overcoming drag, as the blimp maintains a constant velocity and altitude. The work can be determined by calculating the drag force using the coefficient of drag and the velocity, then applying this force over the distance traveled. Despite some confusion about the blimp's altitude, the discussion emphasizes that the work is related to the horizontal component of the pulling force against drag. The blimp's buoyancy and atmospheric conditions complicate the analysis, but they are not directly addressed in the problem statement. Ultimately, the work done is the force required to overcome drag multiplied by the distance.
hganser
Messages
3
Reaction score
0
A blimp of mass 110 kg is pulled at an angle of 52 degrees downwards with respect to the horizontal for D=7 km on level ground at a constant velocity v=14 m/s. If the coefficient of drag (K in F=Kv^2) is 0.5 kg/m, how much work is done by the person pulling?

I know how to find work with the (1/2)mv^2 formula and the Fdcos(angle) formula. But I don't know how to apply the drag into either equation.

Do I just solve for F in the coefficient of drag equation then apply it? Or are there more steps?
 
Physics news on Phys.org
Welcome to PF.

This question is trying to get you to think about the work performed.

The blimp is not changing altitude so no change in potential energy ... so no work there.

It is moving at constant velocity, so no acceleration and no change in kinetic energy. No work there either, eh?

So where could the work be?

Could it be the force to overcome drag taken over the distance of 7 km?
 
Would that be using the equation they give me?
How would I find the work it takes to overcome the drag?
And the blimp is changing altitude. It is going downward at an angle.
 
hganser said:
Would that be using the equation they give me?
How would I find the work it takes to overcome the drag?
And the blimp is changing altitude. It is going downward at an angle.

What is work?

Force over a distance. F of drag over the 7 km. They give you the v so figure the Force of the drag. Since I read it as the blimp being pulled horizontally at constant altitude, then that drag is in the direction against which the person/truck is moving and it is the horizontal component of the tension in the cable. For figuring work isn't this then the force to be taken over the distance traveled?

As to varying altitude, I don't see that in the problem statement. I see the angle at which it is being pulled, but unless there is more to the statement of the problem I think it is at constant altitude over the distance of 7 km.

Now I see that you might read it as the blimp being pulled downward for 7 km*Sin52°, but the comment about level ground suggests otherwise. Moreover, the force against which you would be operating is not gravity, but the net buoyant force of the blimp that I don't see enough information to figure, especially given changes in atmospheric pressure over that distance.
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Back
Top