How Long Does It Take to Charge a 195 µF Capacitor to 125 Volts?

AI Thread Summary
To charge a 195 µF capacitor to 125 volts with a current of 3.71 mA, the charge (Q) is calculated using the formula Q = CV, resulting in 24.3 mC. The initial attempt to find the time (t) using the equation Q = 1 - e^(t/rc) was incorrect due to misunderstanding the nature of the current. Instead, the correct approach is to use Q = IT, leading to the formula t = Q/I. This calculation yields a charging time of approximately 6.55 seconds. The discussion highlights the importance of using the appropriate equations for constant current scenarios.
boneill3
Messages
126
Reaction score
0

Homework Statement



In a camera flash unit, a capacitor is charged up over a period of several seconds (from a battery). The capacitor is discharged very rapidly -- in about 1 millisecond -- into a gas tube producing a very brief, bright flash of light. How long will it take to charge a 195 µF capacitor to a potential difference of 125 volts with a current of 3.71 mA? Answer in seconds.

I was given a hint to solve for Q first.

Homework Equations



Q= CV

Q= 1-e^(t/rc)

The Attempt at a Solution




FIrst I calculated Q= CV to be 195 µF * 125v = 24.3 mC

than I used ohms law to R= V/I = 33.693Kohms


Than I put those values into Q= 1-e^(t/rc)
and solved for t which gave me 162 msec

which was incorrect so I'm note sure where I am going wrong

any pointers?
 
Physics news on Phys.org
In this problem the current is constant and not exponential. So you have simply
Q = IT
 
Thanks mate your a ledgend

FIrst I calculated Q= CV to be 195 µF * 125v = 24.3 mC

Q = IT solve for t = Q/I t = 6.55 seconds
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Collision of a bullet on a rod-string system: query'
In this question, I have a question. I am NOT trying to solve it, but it is just a conceptual question. Consider the point on the rod, which connects the string and the rod. My question: just before and after the collision, is ANGULAR momentum CONSERVED about this point? Lets call the point which connects the string and rod as P. Why am I asking this? : it is clear from the scenario that the point of concern, which connects the string and the rod, moves in a circular path due to the string...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top