How much does the raft move with change of position?

  • Thread starter Thread starter ninesixfive
  • Start date Start date
  • Tags Tags
    Change Position
AI Thread Summary
The discussion revolves around calculating the movement of a raft based on position changes. The user has calculated a shift of -2.12 meters at an angle of -45 degrees but is uncertain about the angle's reference point. It is clarified that the angle should be relative to a clear direction, such as the x-axis. The magnitude of the movement should be expressed as positive, leading to the conclusion that the raft moves 2.12 meters at 135 degrees when viewed from above. The importance of defining the reference direction for the angle is emphasized for clarity.
ninesixfive
Messages
3
Reaction score
0
HW Template missing as it was moved from another forum
heres the problem...
upload_2015-4-14_9-20-19.png


and i figured out part a but don't understand how to get the second part, here is what i have done...
upload_2015-4-14_9-21-49.png

my question is should the angle be from the point of origin? what I am getting is -2.12 meters in a direction of -45 degrees. is this correct? I'm using x2-x1/y2-y1 to get 1.5/-1.5 then using Pythagorean to get the distance of shift and using arctan(-1.5/1.5) to get the -45 ?
 
Physics news on Phys.org
ninesixfive said:
my question is should the angle be from the point of origin?
The vector does not need a reference point, just a reference direction. Relative to the x-axis should be fine. Or relative to some other direction which you clearly describe. Like "from the center towards the new position of [...]".
The magnitude should be positive.
 
So could I say the raft moves 2.12 meters in a direction of 135 degrees when viewing form above?
 
If you clarify 135 degrees relative to what, sure.
 
relative to the point of origin (bottom left corner)... looking at it from above it would move into the the third quadrant , of course the raft would stay square to the x and y axis
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'
Figure 1 Overall Structure Diagram Figure 2: Top view of the piston when it is cylindrical A circular opening is created at a height of 5 meters above the water surface. Inside this opening is a sleeve-type piston with a cross-sectional area of 1 square meter. The piston is pulled to the right at a constant speed. The pulling force is(Figure 2): F = ρshg = 1000 × 1 × 5 × 10 = 50,000 N. Figure 3: Modifying the structure to incorporate a fixed internal piston When I modify the piston...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top